Hi all - I've noticed a small amount of oil weeping from my head gasket, furthest end from the gearbox.
Anyone had this or suggest any lines of enquiry?
Hi all - I've noticed a small amount of oil weeping from my head gasket, furthest end from the gearbox.
Anyone had this or suggest any lines of enquiry?
You sure its not dripping from the rocker on to the gasket? maybe down the back by the waterpump.
possible gasket where it seals along the top where the pushrods pass through.?
Mine has done this since nd 11 on the van. Oil weeps out the headgasket when the engine gets hot. Must fix it one day
I wouldn't worry too much unless its gushing out.
Last edited by Brigsy; 20-09-2012 at 12:57.
Have you retorqued the head bolts lately Andy?
My C1J used to do this, a quick rip withy the torque tench and bye bye leak
Cheers for that Brigsy - It's making a Horrid tappetty noise aswell - don't know if I'm being a paranoid freak or not - need some 2nd opinions really. I'll be driving over to Scoffs on Sunday. Might let a few others make comments. I've got a Tubby manifold to go on after this weekend and also a 6 paddle clutch to go in, so possibly engine out and strip down after the weekend.
no loosining mate, just re torque, i go to about 70nm and many on here go above the recommended.
As said if its not gushing dont worry, imo itll just stop things rusting
LOL Tony, It can only help stop the rot,
Cheers for that Jamie
Oily Olly!!! then again I can talk at the mo...
If you're not going to help with my plight and simply use my thread as an excuse to take the piss then you can all jolly well carry on and aim it squarely at Ipswich
Engines coming out next week.
ipswich... ipswich.... ipswich... ipswich..., just dont seem to get tired of typing or saying that without laughing
poor old oily oli
on a more serious note and back on topic ,what are you going to do to the engine Andy? im guessing tubular mani, cam change ? turbine/compressor change?