-
Non-member
-
Non-member
Re: Dump valve question(don't shoot me yet)
Do you have the oe air filter on? I know mine sounds more with the aftermarket on
-
Non-member
Re: Dump valve question(don't shoot me yet)
Check the dumpvale properly... It might be sticking or leaking when on boost.
Do you get "chatter"? I assume you are boosting fine? Do you have a boost gauge fitted? if so, what does this read?
Is the DV a re-circ?
-
Non-member
Re: Dump valve question(don't shoot me yet)
I should have been more analytic. Sorry im at work and have multiple people spamming me :P
I only get turbo chatter same as before exactly like nothing changed. I don't have any leaks. I removed it and tried again with my finger i can push it open it just feels firm.
i read at hks site that it actually has 2 "piston"like things opening, the smaller one on low psi and the large one at high psi. I can open only the large one. Ofc all that if the chinese version is alike the hks in every aspect...
No it's not a recirc , it vcan be though by changing the front, ofc it comes extra and i didn't want it anyhow.
Last edited by s3irios; 21-09-2012 at 16:00.
Reason: Added more info
-
Non-member
Re: Dump valve question(don't shoot me yet)
-
Non-member
Re: Dump valve question(don't shoot me yet)
Did you get "vehical specific" just Iv personally never seen hms on a 5
-
Non-member
Re: Dump valve question(don't shoot me yet)
Nah not specific. It shouldn't be an issue really it shows it can work but for some reason it doesn't. :S It's a pull type dv not push.Still it should be working..
-
Non-member
Re: Dump valve question(don't shoot me yet)
Silly question, but is your feed to pull the piston back connected above or below the throttle plate?
-
Non-member
Re: Dump valve question(don't shoot me yet)
As i said to the aei pipe, so below throttle
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules