Results 1 to 36 of 36
  1. 03-08-2012, 08:10 #1
    Yann5GTTAlpine
    Yann5GTTAlpine is offline
    Non-member
    Join Date
    Jul 2012
    Posts
    8
    Post Thanks / Like

    My 5 with C1J Alpine head

    New poster! (less than 10 posts)

    Engine :

    • C1J 1397cc with Alpine Head
    • Renault Sport “RS265” camshaft
    • 5 Alpine Turbo piston ( Malhe) machined for free axis mounting
    • FGS700 Cylinder
    • Connecting rods ringed , drilled and polished
    • Lightned flywheels ( -1,2kg) , balanced with crankshaft.
    • Custom T28 Turbo ( GT2560 compressor, T28 Nissan Pulsar GTI-R Turbine , 0.49 A/R turbine housing)
    • Fenix 1B EFI from R21 Turbo.
    • Custom intake manifold with 60mm single throttle bodie
    • Custom Stainless Steel exaust manifold
    • 63mm GrA and downpipe Exaust line
    • Water to Air intercooler

    Chassis :

    Front :

    • Gazshock Coilovers suspensions
    • Clio williams transmission shaft
    • Megane F7R wishbone with Red Polybush suspension.
    • Clio RS1 Hub Carrier ( rocket).
    • 23mm stabilized bar on hard aluminium support.
    • Megane RS F4RT Brembo 4 piston caliper
    • 280*24 brake disc ( Renault Sport Clio RS )
    • Federal 595 RSR tyres 195/50/15


    Rear:
    • Clio 16V rear-wheel axle unit
    • Gazshock Coilovers susensions
    • Federal 595RSR tyres 195/50/15
    OMP 6 point cage
    Reply With Quote Reply With Quote
  2. 03-08-2012, 08:38 #2
    Yann5GTTAlpine
    Yann5GTTAlpine is offline
    Non-member
    Join Date
    Jul 2012
    Posts
    8
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    New poster! (less than 10 posts)




















    Reply With Quote Reply With Quote
  3. 03-08-2012, 08:52 #3
    Yann5GTTAlpine
    Yann5GTTAlpine is offline
    Non-member
    Join Date
    Jul 2012
    Posts
    8
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    New poster! (less than 10 posts)
















    Last edited by Yann5GTTAlpine; 03-08-2012 at 09:11.
    Reply With Quote Reply With Quote
  4. 03-08-2012, 09:14 #4
    Matt@CodeRedMotorsports
    Matt@CodeRedMotorsports is offline
    Non-member Matt@CodeRedMotorsports's Avatar
    Join Date
    Sep 2008
    Location
    Kent
    Posts
    2,212
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    I like this a lot!
    Reply With Quote Reply With Quote
  5. 03-08-2012, 09:20 #5
    Slammed 66
    Slammed 66 is offline
    Committee Member
    Events     Slammed 66's Avatar
    Join Date
    Nov 2011
    Location
    Grimsby
    Posts
    1,819
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    This looks quite epic!!!

    Ross
    Reply With Quote Reply With Quote
  6. 03-08-2012, 09:41 #6
    Tutuur
    Tutuur is offline
    International Area Rep Tutuur's Avatar
    Join Date
    Apr 2011
    Location
    Netherlands
    Posts
    1,347
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    excellent work! looks like a real proper job!
    love the idea of the clio sport plenum too!

    did you make the adaptors for the 225 calipers yourself?
    Reply With Quote Reply With Quote
  7. 03-08-2012, 09:56 #7
    Karlos
    Karlos is offline
    Non-member Karlos's Avatar
    Join Date
    Apr 1999
    Location
    Leeds
    Posts
    414
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    Fantastic
    Reply With Quote Reply With Quote
  8. 03-08-2012, 10:12 #8
    Yann5GTTAlpine
    Yann5GTTAlpine is offline
    Non-member
    Join Date
    Jul 2012
    Posts
    8
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    New poster! (less than 10 posts)

    Thank you,

    Yes I realize all the parts it myself, sometimes I subtracted the machining due to time but are doing all the drawings by me
    Reply With Quote Reply With Quote
  9. 03-08-2012, 10:13 #9
    Logg
    Logg is offline
    Non-member Logg's Avatar
    Join Date
    Sep 2008
    Posts
    1,558
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    Wow the thought and engeening that you've put into your car is amazing.

    The Renault sport inlet is a very nice touch as is the spacer plate to solve the water pump issue when using the alpine head.

    Excellent work my friend I look forward to seeing your future updates.
    Reply With Quote Reply With Quote
  10. 03-08-2012, 11:04 #10
    Tutuur
    Tutuur is offline
    International Area Rep Tutuur's Avatar
    Join Date
    Apr 2011
    Location
    Netherlands
    Posts
    1,347
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    do you mind sharing the drawings?
    Reply With Quote Reply With Quote
  11. 03-08-2012, 11:28 #11
    Danny
    Danny is offline
    Non-member
    Join Date
    Feb 2012
    Posts
    62
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    bad ass!!
    Reply With Quote Reply With Quote
  12. 03-08-2012, 11:41 #12
    markey b
    markey b is offline
    Non-member markey b's Avatar
    Join Date
    Jan 2003
    Location
    Bury St Edmunds
    Posts
    3,126
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    awesome!!
    Reply With Quote Reply With Quote
  13. 01-09-2012, 02:15 #13
    REBEL GT TURBO
    REBEL GT TURBO is offline
    Non-member REBEL GT TURBO's Avatar
    Join Date
    Jan 2011
    Posts
    448
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    Love it people put new fresh ideas into a five! That looks awesome!! More pic's please and welcome to the club!
    Reply With Quote Reply With Quote
  14. 01-09-2012, 08:23 #14
    Tony Walker
    Tony Walker is offline
    Motech Tony Walker's Avatar
    Join Date
    Sep 2005
    Location
    Parkgate Cheshire
    Posts
    3,848
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    Fantastic build, love the videos on youtube too
    Reply With Quote Reply With Quote
  15. 01-09-2012, 10:59 #15
    REBEL GT TURBO
    REBEL GT TURBO is offline
    Non-member REBEL GT TURBO's Avatar
    Join Date
    Jan 2011
    Posts
    448
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    Quote Originally Posted by Tony Walker View Post
    Fantastic build, love the videos on youtube too
    What do the videos come under on YouTube tony??
    Reply With Quote Reply With Quote
  16. 01-09-2012, 13:44 #16
    rs250nut
    rs250nut is offline
    Non-member rs250nut's Avatar
    Join Date
    Oct 2008
    Location
    Learning you can't teach stupid.
    Posts
    2,091
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    Great project, will be watching this one.
    Reply With Quote Reply With Quote
  17. 01-09-2012, 20:19 #17
    Tony Walker
    Tony Walker is offline
    Motech Tony Walker's Avatar
    Join Date
    Sep 2005
    Location
    Parkgate Cheshire
    Posts
    3,848
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    http://www.youtube.com/watch?v=RmnaM...feature=relmfu this i think
    Reply With Quote Reply With Quote
  18. 01-09-2012, 20:20 #18
    Tony Walker
    Tony Walker is offline
    Motech Tony Walker's Avatar
    Join Date
    Sep 2005
    Location
    Parkgate Cheshire
    Posts
    3,848
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    Sorry my bad just watched that again... different build
    Reply With Quote Reply With Quote
  19. 01-09-2012, 21:20 #19
    Os8472
    Os8472 is offline
    East Midlands Regional Rep Os8472's Avatar
    Join Date
    Sep 2008
    Location
    Ragging the tits off my car :)
    Posts
    2,813
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    Dude that looks amazing, keep it up
    Reply With Quote Reply With Quote
  20. 07-04-2013, 20:34 #20
    Yann5GTTAlpine
    Yann5GTTAlpine is offline
    Non-member
    Join Date
    Jul 2012
    Posts
    8
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    New poster! (less than 10 posts)

    Hi everybody .

    A lot of works but this winter I've optimized my engine after have destroy my gearbox and my clutch ( too torque for him ).
    Juste before the dead of the cltuch , with 1,3bar boost :


    About 250 HP and 34 mkg of torque. But problem for have a regular boost ...

    So the new evolution :

    New camshaft : Maxi 5 Turbo
    Hollows pushrods (home made in steel 25CD4)
    Zicral cups Valves
    New EFI : UMC megasquirt


















    if you want , can made hollows pushrods for GTTurbo
    Reply With Quote Reply With Quote
  21. 07-04-2013, 20:38 #21
    Brigsy
    Brigsy is offline
    Non-member Brigsy's Avatar
    Join Date
    Sep 2008
    Location
    Redcar
    Posts
    4,138
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    Awesome
    Reply With Quote Reply With Quote
  22. 07-04-2013, 20:49 #22
    TNT ANDY
    TNT ANDY is offline
    Non-member TNT ANDY's Avatar
    Join Date
    Sep 2008
    Posts
    2,614
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    OMFG
    Reply With Quote Reply With Quote
  23. 07-04-2013, 21:49 #23
    Matt Cole
    Matt Cole is offline
    Committee, Moderator Matt Cole's Avatar
    Join Date
    Sep 2008
    Location
    Durham
    Posts
    5,259
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    Awesome. Proper job instead of the usual bought off the shelf stuff!
    Reply With Quote Reply With Quote
  24. 08-04-2013, 03:04 #24
    Big Steve - Raider
    Big Steve - Raider is offline
    Non-member
    Join Date
    Jul 2003
    Posts
    3,717
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    Quote Originally Posted by Yann5GTTAlpine View Post
    New poster! (less than 10 posts)if you want , can made hollows pushrods for GTTurbo
    How much Yann?
    Reply With Quote Reply With Quote
  25. 08-04-2013, 03:22 #25
    B18ftMOJO5
    B18ftMOJO5 is offline
    Non-member B18ftMOJO5's Avatar
    Join Date
    Dec 2012
    Posts
    1,512
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    Pure Class. Awesome project. Exceptional work.
    Reply With Quote Reply With Quote
  26. 08-04-2013, 19:23 #26
    Tony Walker
    Tony Walker is offline
    Motech Tony Walker's Avatar
    Join Date
    Sep 2005
    Location
    Parkgate Cheshire
    Posts
    3,848
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    Fantastic work... keep us updated
    Reply With Quote Reply With Quote
  27. 19-06-2013, 22:48 #27
    Yann5GTTAlpine
    Yann5GTTAlpine is offline
    Non-member
    Join Date
    Jul 2012
    Posts
    8
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    New poster! (less than 10 posts)

    hello guys

    Sorry for my absence but I have a lot of work ...
    Neanmoin I advanced on my engine, I finally mounted with the new box JC5 strengthened and he start at the beginning of June. Today I've done the first 20 kilometers!
    There is much work to adjust the management Megasquirt but I set the AFR between 2000 and 3500 RPM and the engine not running mla, I can do the running.





    Max valves lifting :


    Intake valves lifting at PMH:



    timing of peak Intake cam:


    Reply With Quote Reply With Quote
  28. 19-06-2013, 22:53 #28
    Wallace
    Wallace is offline
    Non-member Wallace's Avatar
    Join Date
    Jan 2009
    Location
    herts
    Posts
    1,199
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    Outstanding

    Such precision and attention to detail.
    Reply With Quote Reply With Quote
  29. 19-06-2013, 22:55 #29
    GTphil
    GTphil is offline
    Non-member GTphil's Avatar
    Join Date
    Sep 2008
    Location
    planet no free time whatsoever
    Posts
    1,894
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    Full of want! Fantastic work!
    Reply With Quote Reply With Quote
  30. 19-06-2013, 22:58 #30
    TNT ANDY
    TNT ANDY is offline
    Non-member TNT ANDY's Avatar
    Join Date
    Sep 2008
    Posts
    2,614
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    I would give my right nut for this conversion.


    Ubber cool
    Reply With Quote Reply With Quote
  31. 19-06-2013, 23:29 #31
    w35ty
    w35ty is offline
    West Midlands Area Rep w35ty's Avatar
    Join Date
    Feb 2009
    Location
    Walsall
    Posts
    1,223
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    Love it!
    Reply With Quote Reply With Quote
  32. 20-06-2013, 08:20 #32
    Logg
    Logg is offline
    Non-member Logg's Avatar
    Join Date
    Sep 2008
    Posts
    1,558
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    It just gets better and better well done excellent work.

    Wish I had the time, space, knowledge and money to build one.

    In my mind this ultimate engine to fit to the GTT What Renault could of fitted at the time if cost and safety of joe public wasn't a issue.
    Reply With Quote Reply With Quote
  33. 20-06-2013, 08:45 #33
    caymanr26
    caymanr26 is offline
    Non-member
    Join Date
    Mar 2013
    Posts
    259
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    this is amazing - fair play

    What discs are they - 172/182 clio? and do they fit wihout any adjustment?
    Reply With Quote Reply With Quote
  34. 21-06-2013, 06:55 #34
    HAndy
    HAndy is offline
    Non-member
    Join Date
    Jan 2009
    Location
    norwich
    Posts
    1,059
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    awesome engine

    one of the best 1.4 pushrod engine builds, with probable big hp output

    watch this space
    Reply With Quote Reply With Quote
  35. 21-06-2013, 07:10 #35
    safehands
    safehands is offline
    Non-member safehands's Avatar
    Join Date
    May 2013
    Posts
    199
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    Looks tremendous well done
    Reply With Quote Reply With Quote
  36. 21-06-2013, 12:11 #36
    sega
    sega is offline
    Non-member
    Join Date
    Sep 2008
    Location
    hasselt-belgium
    Posts
    103
    Post Thanks / Like

    Re: My 5 with C1J Alpine head

    supercinq fatal!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules