Fly wheel for EFI - C1J

[TNT ANDY]

Just been measuring up and found 1 or 2 differences, they are very close, but I would need a spare engine and clutch etc to be sure, but it looks like it will go on a c1j with minimal fuss. This is a 200mm wheel off a Scenic. Here's what I know so far........

1. The centre bores are both the same size.


2. The overall thickness is the same.


3. The clutch cover plates are the same size and orientation.

4. The timing mark is in the same location.

5. The starter ring gear is the same.




What is different???

1. The crank end bolt pattern is ever so slightly different.


2. The width of the clutch spring recess is also smaller. The C1J has a 125mm wide recess and the Scenic one has 112mm wide recess but both of the same depth.

And that's all I know atm. I will try to find a spare clutch plate and cover as soon as I can.

[Scoff]

Hi Andy

Good digging

The bolt pattern - one bolt hole is offset slightly on the C1J, so does the scenic one maybe not have the offset, or maybe its offset the other way ?

[TNT ANDY]

Hi Andy

Good digging

The bolt pattern - one bolt hole is offset slightly on the C1J, so does the scenic one maybe not have the offset, or maybe its offset the other way ?

That got me thinking - I assumed that the holes would all be evenly spaced, so when comparing 1 against the other I had the back faces of each touching. As it happens, if you turn them around they all line up.

Which only leaves the clutch recess I need to get me a clutch plate from somewhere. I'll ask around the local massive.

Andy

[michael tierney]

very good gen andy,is the pic up for the tdc sensor in the same place on the g/box?

[markey b]

That got me thinking - I assumed that the holes would all be evenly spaced, so when comparing 1 against the other I had the back faces of each touching. As it happens, if you turn them around they all line up.

Which only leaves the clutch recess I need to get me a clutch plate from somewhere. I'll ask around the local massive.

Andy

i has millions andy! got about 2-3 used clutches u can have to play with

[TNT ANDY]

i has millions andy! got about 2-3 used clutches u can have to play with

Nice one TNT Markey. I'll pop down next week if I can. BTW, the TNT stands for you blow stuff up a lot.

[TNT ANDY]

very good gen andy,is the pic up for the tdc sensor in the same place on the g/box?

Yes it's in the same place. But I don't know what sensor you would use. I. Would like to think you could use the standard 5 pick up.

[Miller]

That's great news, once the clutch is checked we need to try the 215mm next..... I wonder how different that 1.6 crank is to the c1j

Chris

[markey b]

Nice one TNT Markey. I'll pop down next week if I can. BTW, the TNT stands for you blow stuff up a lot.

i like to keep myself busy, and i also love to take my engine apart and replace expensive core components.......

always worth it though

[5teve L]

Doesn't the 200mm Volvo 440/80 flywheel not fit, pretty sure it works with Efi as well ?
Although I expect the scenic one would be more readily available if it will fit..

[Miller]

Doesn't the 200mm Volvo 440/80 flywheel not fit, pretty sure it works with Efi as well ?
Although I expect the scenic one would be more readily available if it will fit..

No, the bolt pattern is different to the c1j

[5teve L]

No, the bolt pattern is different to the c1j

Ah, I'm getting confused now with the F7P