GTA Turbo

[clee]

The last one is almost done and due to ship once AC is finished .
Taken in PX with some issues I'm about to start the rebuild on this well known car .


Good non rusty base .it has turret issues and head gasket problems .Engine is out on the stand awaiting new gaskets and the turret deformation is in hand .Paint is pretty good with a few blemishes here and there that Andy001 can soon sort .
Offered now as another on the drip build up purchase with spec open on engine if required .
As a rough guide to put back together in std form with fully refurbished running gear etc and std lump around £5k.You could spend that on one that is complete but I doubt it will look like this .



Car has leather seats non OE but in very good order and ABS .Talk to me

:wink:

[D4WNO]

Lee, tut tut

https://www.rtoc.org/boards/showthread.php?t=37

[clee]

wot I done ???

given price, location and condition innit ...just a bit of off the wall selling innit

[Ashy]

I'm confused, is it for sale as the pics show, is that the lump and running gear to go with it?

And whats the price?

I've read the advert twice, maybe I'm missing something mate

[Scoff]

It'll hinge on weather you know what 'on the drip' means It made sense to me though, 5K over a period of time will see it built back up all fresh. Sorry if I got it wrong

[clee]

Sometimes I just type what sounds right in my head and just copied the ad over from RAOC

But yes Scoff is correct .Spend 5k on one on ebay or 5k and have it built up and refurbed as we go I've done a few on this basis now and it seems to work well ,keeps both parties solvent and you get what you pay for

[clee]

Sun has been out so a good day for spray .Slowly it is all coming together for some lucky person ...it could be you

[Gibbo69]

Well tempted... always loved the GTA

[clee]

Deposit secures and built to spec
I have 3 or 4 options on engine from totally std to full standalone with cams and breathing mods . Easily ready for Renault Turbo UK Festival

[clee]

Box done and sub-frame assembled .
Decision time on engine but I think I will throw the reverse headers ,down pipe etc from JIL race project on a 2.5 std bottom end but with modded heads and cams .
Adaptronic control .
JIL has gone to stage ..... on engine design anyway so all these bits are now spare for this car .
Found some good Koni rear dampers and lowering springs so they go on as well .

Car still remains for sale in any guise but I have to get on and clear the decks for others and a car in bits takes up 2 car spaces .....