Map Sensor Advice

[Coops]

I run an F7P turbo, so its map sensor based mapping to the standard chipped ECU

currently running 15psi (1.1Bar) through a renault 21 turbo 2.0bar map sensor (to the best of my knowledge thats what it is)

to up the boost i guess i require a new 3.0bar sensor as the first 1.0 bar is atmospheric right?

any advice and info on what i need and where from much appreciated

cheers

Ben

[clee]

http://www.efi-parts.co.uk/Home.html

Talk to this guy ,seems to know what he's on about

[Allan]

New poster! (less than 10 posts)

The map sensors on their look like the cosworth 3 bar ones, is a guy in notts who does them for about £30 coops, not sure if the connections will be a direct fit with the r21

[Penfold aka The Dealer]

Why not join the club to ask technical advise??

[Winston]

Coops membership must have run out... as he was a member a few days ago?

Very welcoming

[Lewis]

GM 3 Bar sensor, uses the same connector as the 2 bar 21 turbo item. If you go to a cosworth sensor you'll have to swap the plug on the loom

[Adam 005]

Coops membership must have run out... as he was a member a few days ago?

Very welcoming

nice