-
-
Moderator, Committee
Re: Going in for service need help on bits needed :)
Oil - something like Mobil1 15W50 or Castrol RS 10W60 is suitable. Don't touch anything that's 0W40 as it's too thin. You will need 2.6 litres
Oil filter - RTOC shop (actually, you'll have to check stock), if none: http://www.gt-turbo-spares.co.uk/car...gory&cat_id=13
Brake fluid - DOT4 is the advice I was given due to the age/design of the brake system on the GTT
Gearbox oil - 75-90s 3.4 litres
Air filter - http://www.gt-turbo-spares.co.uk/car...gory&cat_id=13
-
Re: Going in for service need help on bits needed :)
Thanks for the help
Just had oil done ect was a problem with bleeding the brakes. Rear Caliper nipples are snapped what's the best way to get this sorted without buying new Calipers.
Thanks
-
Moderator, Committee
Re: Going in for service need help on bits needed :)
Oh dear. If you can't drill them out and replace them (not many people succeed at this), then it's either new calipers, or the bleeding will have to be done from the end of the flexi pipe (i.e. you might get a very small amount of air in the caliper itself.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules