what bolts hold the caliper on

[djinuk]

the two bolts holding the caliper to the stub axel on the front of my r5 were rounded and a pain to get off , just wondering that size/etc they are and where i can get replacements

[Purple_rob]

I think I have two you can have mate. I'll check.

Front or rear?

[djinuk]

its the front drivers mate, if you have that would be cool, if not though then i am guessing they are a pretty simple to sorce bolt aint they? .

[bye_all_c_ya]

i should also have two if needed

[stuTHC]

I think they are a M12, dunno if they are a std 1.75 thread or fine, ive a feeling they could be fine thread, 1.5mm, dunno thou, pointless post really LOL
There not a usual run of the mill bolt as the hexhead is 18mm AF rather than 19mm(someone using an 19mm socket/spanner has probably rounded them off)

[Purple_rob]

these are them.

Drop me a PM with your addy if you want them mate.

Rob

[djinuk]

you got pm mate, appreciate that a lot

[Rob@Backyardracing]

m10 1.5 pitch from memory...

[dave j gtt]

what bolts hold starter moter on any one got a picture. of the bolt patten that holds the be atch on fookin weather. down pipes half off do the rest tomorrow if i can be arsed wit all the effort

[bones660]

what bolts hold starter moter on any one got a picture. of the bolt patten that holds the be atch on fookin weather. down pipes half off do the rest tomorrow if i can be arsed wit all the effort

they are m10 . the patern is a upsidedown L SHAPE ON THE GEARBOX .