hi all just after a bit of info in which way to go next
here are 2 flat out wide open throttle logs from about 10 mins ago
the afr need to drop a few poins would ideally like to see 12.5 not 13.0
also when cruising and the turbo spools it goes lean ,
at present the carb is
standard 1st stage
2nd stage is 1.3mm
main is 1.3
and the a/c is 1.0mm
i can get good afr on idle
ive removed the dump valves and plumbed the boost reading at the lower part of the manifold
the inlet temp is on the intercooler pipe just before the carb lobster
which should i look at adjusting next
first stage? as its lean on cruise /low psi
or increase the second stage to 1.35/1.4mm
or do i look at reducing the a/c to .95mm
cruising log ----
thanks in advance
Corty