-
-
Non-member
Re: New Tailgate arrived need advice pictures added :)
My boot was the same m8 I used some horrible black glue can't remember the name but basically glue been on for years no problem.
You could use double sided number plate tape but try a few different thicknesses to get it right
-
Moderator
South East Regional Rep
Re: New Tailgate arrived need advice pictures added :)
I think a lot of members have used a product called sikaflex. But once stuck on, it won't come off. Can assume the badges can be stuck on with this too. Just make sure you get them both in the correct location both times
As for the windscreen seal, I think it's bottom left as you look at it. This is only from memory so I might be wrong. Can anyone correct me or confirm?
-
Re: New Tailgate arrived need advice pictures added :)
Yeah thanks guys any more names for the recommended adhesive would be great that's been used for this so I can pick some up Friday. and a confirmation of where the water outlet hole on the seal should go would be ace
-
East Midlands Area Rep
Re: New Tailgate arrived need advice pictures added :)
Tigerseal mate. it's what the pro's use.
-
Committee, NW Regional Rep
Re: New Tailgate arrived need advice pictures added :)
Sikaflex or Tiger Seal
-
Moderator, Committee
Re: New Tailgate arrived need advice pictures added :)
I wouldn't bond it on. I would use what worked for me previously, that allowed me to remove the spoiler at a later date or reposition it if I got it wrong in the first place. It's double sided foam tape. Like Junglist says, double sided number plate tape.
It was very cheap, it wasn't noticeable once fitted and the spoiler never budged in the following years.
http://www.ebay.co.uk/bhp/white-double-sided-foam-tape
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules