Hey Chaps,
I recently had a crack in the body of my carburettor so a fellow RTOC member had kindly given me a body. I have then since taken all jets, all attachments etc from my carb over to this body (as it was missing its main, the mixture screw etc) and rebuild two rough carbs into one okay one.
I also used the top of the carb supplied as it had decent mounts for the lobster (mine had cracked) but I have taken the float again and all bits over from my old carb to this.
The car now however hesitates on initial acceleration for half a second, likes its bogged down and once you get past this and get going however it also starts misfiring at about 3.5k rpm and it wont get over this. (You can however rev it over this barrier if the car is standing still).
It also seems to loose power if you start to corner with your foot down? Starts hesitating again.
Any thoughts? Help would be much appreciated.
Luke