-
Genuine Minilite fitment
I've got a set of Minilites for this race car I'm building up and after a 10 week wait for them, they came with a 61mm centre-bore!
They came with centre caps (which I can't use for hill climb) and these are meant to fit hub spigot 1st before wheel fits over them. The internal diameter of them is 58.8mm and there is no way they'll fit anyway.
Question is, how safe do you think 61mm centres are on 60.1mm spigots? Spec for racing is for hub-centric wheels, but these things are going to need the thinnest of thin spacers for that to happen. Like beer-can material or something 0.5mm thick?
I've just had a can of Guinness, hoping that I might fudge a fix tomorrow before the weekends boosting.
-
East Midlands Area Rep
Re: Genuine Minilite fitment
Thats a shame the wheels werent 60.1mm centre when made, spigots will be thin however at least if theres something in the gap there should be no movement at all.
Probably need spigots made of a sturdy material so they dont fall to pieces in minutes
-
Re: Genuine Minilite fitment
I think Minilite (KN) are really struggling. 10wks and they end up wrongly machined.
Anyway, if the beer can idea doesn't work, they can be machined out and fit nylon spigot rings to 60.1mm. Cheers.
-
Re: Genuine Minilite fitment
Finally, they don't fit. Foul the caliper.
R&R Alloys are useless and Minilite (KN) even worse.
If they don't do a refund, they'll fit the Golf.
-
Non-member
Re: Genuine Minilite fitment
You really want something more substantial than 0.5mm shim in there. Something that thin has no rigidity, so it would be difficult to get a decent fit on both mating faces, and not do its job to locate the wheel. I would want at least 2-3mm wall thickness for something that is load bearing or providing a location on a wheel, especially for racing.
Depending on what material the spigots are, you could either get the spigots hard chromed and reground to 61mm to suit the wheels, or bore the wheels out, and machine up some sleeves and press them in.
Got any pictures?
-
Re: Genuine Minilite fitment
I'm having more issues with these things. Will update with pics if I get a reply from the suppliers. Basically, they just don't bloody fit.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules