I need a bit help with a few measurements of a GTT Subframe. The specific measurements I'm after are listed below and can really only be done with the Subframe off IMHO:
- From the centre of the LH Wishbone FWD Mount (middle distance between the two lugs) to the centre of the RH Wishbone FWD Mount.
- From the centre of the LH Wishbone REAR Mount (as above) to the centre of the RH Wishbone REAR Mount.
The reason I need the measurements is to help with some calculations I'm doing with the geometry that I will use to help with modifying my Leda Struts on my GTT as this will be converted to run 172 Wishbones on it's widetrack conversion. (The body work will be modified to accommodate the track width)
Thanks in advance.