-
afrs again
right just put a t2 turbo back on with stock jets apart from 2nd stage drilled to 1.2mm was hitting 15 psi and afrs was around 13.1 so turned boost down to 1.3 psi and its still the same is this safe to keep like this or too lean ?
-
Non-member
-
Re: afrs again
how can i get it down abit
-
Committee, NW Regional Rep
Re: afrs again
Try a 1.00mm A/C
-
Re: afrs again
ive got a 0.9 will that do ?
-
Committee, NW Regional Rep
Re: afrs again
I suspect that'll make things a bit too rich. You could try it though. Or you could drill the 2nd stage out to 1.3 and re-check the AFR's then.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules