Anyone know if there is a separate fuse or something for the Tail Light?
My Nearside Lights all work fine,
My offside Cluster (rear indicator/Fog and Brake light) work fine but just not the tail.
I swapped N/S Cluster (which works fine) over with O/S and it still don't work so know its not bad connection or bulb.
I've cleaned the Plastic Connector which slides onto the cluster (see pic) and i think its the "Blue" wire which is causing the problem.
It's strange because the same bulb is for Brake & Tail and it illuminates when i press the break but the Tail light don't come on. (i've tested bulb on other side and it works fine).
Same problem with O/S Front Side light (blue cable) i've cut the block off, connected wires straight to bulb holder, that don't come on neither.
So its definitely a fuse or dodgy wire somewhere?
Appreciate any ideas etc,