Originally Posted by
Haz
was just a suggestion if you wanted to keep costs down. it seems your fairly handy and time costs nothing if its your own car, they arent big jobs.
like you say the skirts would require some work now, but again its more prep time than money. blow in's can be very easy if you are familiar with the paint gun, there's a few ways and dont mind giving a few pointers to try if your stuck.
regards the dizzy, yes. so long as you can rotate the pump from above (like the bottem of the dizzy does), but not engage the gear on the cam. there's different 'tools' that will do the job. just spin it up, not with the drill flat out mind, until you get oil flow and it'll be fine after that, assuming it is just because its dry and no damage has been done.