-
Non-member
Central locking wiring?
My middle central locking button dosnt work,
Has anyone got a wiring diagrame please?
Not sure if it matters but mines a ph1
Elliott
-
Non-member
Re: Central locking wiring?
anyone?
-
Non-member
Re: Central locking wiring?
I haven't a clue about electrics or I'd help.. Have you tried the wizard?
-
Non-member
Re: Central locking wiring?
Havnt asked him. Looked through pages but no luck?
Just need to no on the back of the switch what colours do what lol
Elliott
-
Non-member
Re: Central locking wiring?
5 wires, this is off the top of my head so bear with me
outer ones are positive lock and unlock, so pin 1-5
there are 3 middles, red black and blue
red is constant 12v
black is earth
blue is switch illumination
u can test locking by jumping a wire from red to either of the outer ones to see if it locks or unlocks
hope this helps!
-
Non-member
Re: Central locking wiring?
Perfect.
Just what I needed to no. I can just send 12v down 1 or 5 to see if the motors work.
Thankyou!
Elliott
-
Non-member
Re: Central locking wiring?
Need some more help on this,
I have found my two wires at the footwell which don't go through into the door,
On the door motor their are 5 wires. Green and blue are the lock and unlock,
But if I send 12v down the green. The blue has to be earthed for it to work..
So how do I get this to work?
Elliott
-
Non-member
Re: Central locking wiring?
you very sure its the actual central locking switch ?
could be the relay!! or duff solenoids....
-
Non-member
Re: Central locking wiring?
so this dosnt confuse anyone... have found out these arnt genuine Renault door solenoids, that's why the colours didn't make sence,
should be sorted now though!
Elliott
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules