Results 1 to 34 of 34
  1. #1
    East Midlands Area Rep Mr Raider's Avatar
    Join Date
    Sep 2008
    Location
    Norwich
    Posts
    2,062
    Post Thanks / Like

    11 Turbo Bushes

    I need set of anti roll bar bushes for the phase 1 as they are original and very soft , any ideas where i can get them from?

  2. #2
    Committee, Shop Manager, SE Regional Rep Bigfoot's Avatar
    Join Date
    Jan 2005
    Location
    Essex
    Posts
    5,735
    Post Thanks / Like

    Re: 11 Turbo Bushes

    Just took a look on our system for inner and outer for them, they are both available from Pearl

  3. #3
    East Midlands Area Rep Mr Raider's Avatar
    Join Date
    Sep 2008
    Location
    Norwich
    Posts
    2,062
    Post Thanks / Like

    Re: 11 Turbo Bushes

    Ah cheers bud,what motor factor you work for?

  4. #4
    Committee, Shop Manager, SE Regional Rep Bigfoot's Avatar
    Join Date
    Jan 2005
    Location
    Essex
    Posts
    5,735
    Post Thanks / Like

    Re: 11 Turbo Bushes

    Motor Parts Direct

  5. #5
    East Midlands Area Rep Mr Raider's Avatar
    Join Date
    Sep 2008
    Location
    Norwich
    Posts
    2,062
    Post Thanks / Like

    Re: 11 Turbo Bushes

    Cheers mate,called Norwich branch & they cant find in book or on system

  6. #6
    Committee, Shop Manager, SE Regional Rep Bigfoot's Avatar
    Join Date
    Jan 2005
    Location
    Essex
    Posts
    5,735
    Post Thanks / Like

    Re: 11 Turbo Bushes

    They are useless

    have set them straight, got them finding the right part numbers and looking up the right part

    If you contact them again they will sort you out, sorry about that, should have given you the part numbers

    PB4261 for inner
    PB4517 for outer

  7. #7
    East Midlands Area Rep Mr Raider's Avatar
    Join Date
    Sep 2008
    Location
    Norwich
    Posts
    2,062
    Post Thanks / Like

    Re: 11 Turbo Bushes

    Topman, - cheers Dale really appreciate your help the old girl is getting there slowly lol Cheers Karl

  8. #8
    East Midlands Area Rep Mr Raider's Avatar
    Join Date
    Sep 2008
    Location
    Norwich
    Posts
    2,062
    Post Thanks / Like

    Re: 11 Turbo Bushes

    Got round to fitting the bushes today, the inners i bought are loads different from the original ones as they are rather flat just with ridges where the clamp goes over Anyone else had any issues with 11 inner bushes? Not sure if they are the same as the ones for the 5
    Attached Images Attached Images  
    Last edited by Mr Raider; 07-10-2012 at 16:18.

  9. #9
    Non-member
    Join Date
    Jan 2009
    Location
    norwich
    Posts
    1,059
    Post Thanks / Like

    Re: 11 Turbo Bushes

    they should fit fine

  10. #10
    East Midlands Area Rep Mr Raider's Avatar
    Join Date
    Sep 2008
    Location
    Norwich
    Posts
    2,062
    Post Thanks / Like

    Re: 11 Turbo Bushes

    lol what the 5 ones? hole is around 23mm, hoping to find rubber ones although will get polybushes if thats all there is

  11. #11
    East Midlands Area Rep Mr Raider's Avatar
    Join Date
    Sep 2008
    Location
    Norwich
    Posts
    2,062
    Post Thanks / Like

    Re: 11 Turbo Bushes

    Hopefully get it right, third time lucky. Picked up my special order bushes from renault yesterday and they are wrong! at least i know they are not part no. 7700 789 815

  12. #12
    East Midlands Area Rep Mr Raider's Avatar
    Join Date
    Sep 2008
    Location
    Norwich
    Posts
    2,062
    Post Thanks / Like

    Re: 11 Turbo Bushes

    Does anyone know the renault part no. for the outter anti roll bar bushes for an 11 turbo with 25mm anti roll bar? not same as the 5 ones as they are not long enough to get the clamp around the recess

  13. #13
    East Midlands Regional Rep Os8472's Avatar
    Join Date
    Sep 2008
    Location
    Ragging the tits off my car :)
    Posts
    2,813
    Post Thanks / Like

    Re: 11 Turbo Bushes

    I'd have a look at 172 poly items mate, yes mine are 23mm jobs but there was a 25mm option. The fitment was perfect. Just the inners to sort :/

  14. #14
    East Midlands Area Rep Mr Raider's Avatar
    Join Date
    Sep 2008
    Location
    Norwich
    Posts
    2,062
    Post Thanks / Like

    Re: 11 Turbo Bushes

    Ah, so you did fit the outters then? might look into getting standard rubber outters to keep it original, innners are a nightmare

  15. #15
    Non-member
    Join Date
    Sep 2012
    Posts
    1
    Post Thanks / Like

    Re: 11 Turbo Bushes

    First post!

    Hi. anyone know if poly bushes are available for the 25 Turbo, just starting an overhaul/mild renovation of mine, would be good to replace them while I have the 4 corners off

  16. #16
    East Midlands Area Rep Mr Raider's Avatar
    Join Date
    Sep 2008
    Location
    Norwich
    Posts
    2,062
    Post Thanks / Like

    Re: 11 Turbo Bushes

    Hi,

    I would call powerflex to see if they do them, from memory they are not listed on their website, are the bushes on 25's the same or similar to other models? need new bushes for my 11, think outters are the same as the ones for a 172 clio or they will fit!

  17. #17
    Non-member
    Join Date
    Sep 2008
    Location
    Hackney
    Posts
    117
    Post Thanks / Like

    Re: 11 Turbo Bushes

    Quote Originally Posted by Mr Raider View Post
    Does anyone know the renault part no. for the outter anti roll bar bushes for an 11 turbo with 25mm anti roll bar? not same as the 5 ones as they are not long enough to get the clamp around the recess
    I just ordered a set. Part number 77 00 760 263.
    £7.62 each .

  18. #18
    East Midlands Area Rep Mr Raider's Avatar
    Join Date
    Sep 2008
    Location
    Norwich
    Posts
    2,062
    Post Thanks / Like

    Re: 11 Turbo Bushes

    Quote Originally Posted by jack joy View Post
    I just ordered a set. Part number 77 00 760 263.
    £7.62 each .

    Thanks mate, this part no. for outters? slightly larger than the 5gtt outters?

    Need outters defo, maybe inners if i can source them but bushes are rather thin things

  19. #19
    Non-member
    Join Date
    Sep 2008
    Location
    Hackney
    Posts
    117
    Post Thanks / Like

    Re: 11 Turbo Bushes

    It's for the outer ones. Different part number for the 5 ones, but maybe they would fit ?? ..
    Just got these off the microfiche for the inner ones , so may be a little out of date! Two numbers ,for some reason ,first is listed for slightly earlier models.
    77 00 789 815
    77 00 789 816

    good luck

  20. #20
    East Midlands Area Rep Mr Raider's Avatar
    Join Date
    Sep 2008
    Location
    Norwich
    Posts
    2,062
    Post Thanks / Like

    Re: 11 Turbo Bushes

    Top man, - muchos thanks

  21. #21
    East Midlands Area Rep Mr Raider's Avatar
    Join Date
    Sep 2008
    Location
    Norwich
    Posts
    2,062
    Post Thanks / Like

    Re: 11 Turbo Bushes

    77 00 789 815's dont fit. too big and hole too small for anti roll bar

    Perhaps 77 00 789 816's are the ones for early renault 11's with larger hole around 24mm come on Oli! lol

  22. #22
    East Midlands Regional Rep Os8472's Avatar
    Join Date
    Sep 2008
    Location
    Ragging the tits off my car :)
    Posts
    2,813
    Post Thanks / Like

    Re: 11 Turbo Bushes

    Quote Originally Posted by Mr Raider View Post
    77 00 789 815's dont fit. too big and hole too small for anti roll bar

    Perhaps 77 00 789 816's are the ones for early renault 11's with larger hole around 24mm come on Oli! lol
    Don't blame me, speak to the cheese eating surrender monkeys at renault

  23. #23
    Non-member
    Join Date
    Sep 2008
    Location
    Hackney
    Posts
    117
    Post Thanks / Like

    Re: 11 Turbo Bushes

    Quote Originally Posted by Mr Raider View Post
    77 00 789 815's dont fit. too big and hole too small for anti roll bar

    Perhaps 77 00 789 816's are the ones for early renault 11's with larger hole around 24mm come on Oli! lol
    I've just edited my garbled reply! Double checked on the fiche.

    77 00 789 816- inner a/r bush for 24 mm bar
    77 00 760 263- outer a/r bush for 24mm bar
    Last edited by jack joy; 01-01-2013 at 19:44.

  24. #24
    East Midlands Area Rep Mr Raider's Avatar
    Join Date
    Sep 2008
    Location
    Norwich
    Posts
    2,062
    Post Thanks / Like

    Re: 11 Turbo Bushes

    Cheers bud, much appreciated. Are the 816's really slim bushes? as on my 11 there aint much to them at all granted they are 26 years old!

  25. #25
    Non-member
    Join Date
    Sep 2008
    Location
    Hackney
    Posts
    117
    Post Thanks / Like

    Re: 11 Turbo Bushes

    I haven't ordered the inner 816 ones, but only two inner types listed for both phases- (815- for 23mm bar) & ( 816- for 24mm bar)

  26. #26
    East Midlands Area Rep Mr Raider's Avatar
    Join Date
    Sep 2008
    Location
    Norwich
    Posts
    2,062
    Post Thanks / Like

    Re: 11 Turbo Bushes

    Ahh ok, hopefully there is more difference apart from 1mm in hole bore size, Oli has some 816's on order. Thanks mate

  27. #27
    East Midlands Regional Rep Os8472's Avatar
    Join Date
    Sep 2008
    Location
    Ragging the tits off my car :)
    Posts
    2,813
    Post Thanks / Like

    Re: 11 Turbo Bushes

    816's should be in Tuesday, hopefully fit them saturday

  28. #28
    East Midlands Area Rep Mr Raider's Avatar
    Join Date
    Sep 2008
    Location
    Norwich
    Posts
    2,062
    Post Thanks / Like

    Re: 11 Turbo Bushes

    Coolio, please send me a picture bud or post on here

  29. #29
    East Midlands Regional Rep Os8472's Avatar
    Join Date
    Sep 2008
    Location
    Ragging the tits off my car :)
    Posts
    2,813
    Post Thanks / Like

    Re: 11 Turbo Bushes

    Ok just to confirm, the inner arb bushes part no. ending 816 do fit, they took a lot of brute force to get the brackets on but that's not out of the norm

  30. #30
    East Midlands Area Rep Mr Raider's Avatar
    Join Date
    Sep 2008
    Location
    Norwich
    Posts
    2,062
    Post Thanks / Like

    Re: 11 Turbo Bushes

    Nice and snug eh?! bet the anti roll bar cant be pushed through the bushes now! lol

  31. #31
    East Midlands Regional Rep Os8472's Avatar
    Join Date
    Sep 2008
    Location
    Ragging the tits off my car :)
    Posts
    2,813
    Post Thanks / Like

    Re: 11 Turbo Bushes

    Quote Originally Posted by Mr Raider View Post
    Nice and snug eh?! bet the anti roll bar cant be pushed through the bushes now! lol
    Mate it's so tight now the arb is doing my suspension work than the shocks and springs lol

  32. #32
    East Midlands Area Rep Mr Raider's Avatar
    Join Date
    Sep 2008
    Location
    Norwich
    Posts
    2,062
    Post Thanks / Like

    Re: 11 Turbo Bushes

    lol you sure they are the right ones?!

  33. #33
    East Midlands Regional Rep Os8472's Avatar
    Join Date
    Sep 2008
    Location
    Ragging the tits off my car :)
    Posts
    2,813
    Post Thanks / Like

    Re: 11 Turbo Bushes

    Quote Originally Posted by Mr Raider View Post
    lol you sure they are the right ones?!
    Yes

  34. #34
    East Midlands Area Rep Mr Raider's Avatar
    Join Date
    Sep 2008
    Location
    Norwich
    Posts
    2,062
    Post Thanks / Like

    Re: 11 Turbo Bushes

    Cool, ill take a look and get some before I have to stop my compulsive addiction with buying parts for it!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •