Right what should i roughly be looking at power/torque/AFR's wise with this spec..
Propper HG/Bolts
K-tec stage 1 fuel pump/std reg
Double cap cooler
Proper ally rad/seperate cooler
Samco's all the way through
Stage 3 T25@12 psi..poor show i know
Decent Plugs/leads/Cap/Arm
Cup Mod
Metal lobster,Believe standard carb otherwise
Sidey Pipe with enlarged elbow/lagged down pipe
And a Group A clutch/LB flywheel
Think thats it
Now it was setup at 12psi for running in and left rich(something my wallet aint been since)..
Problem is over 90mph it just hits a wall, feels like the turbo's fell off,flat and lifeless..used to pull like a fudgekin train(bit scary tbh )..,
Has a Innovate AFR Gauge fitted....(can and will get any readings i can if it helps, just give me a starting point as to revs/gear........I'll do what i can to help you help me if you's could please..)
and the readings are staying Rich whatever i do to it which i suppose is a double edged bonus
So wotcha's reckon....Turbo duff, fueling messy or just needs some Tuning knowledge/magic sprinkling?>>>>>Anyone got any Recommendations as to who is worth a trip??
Anyway's sorry its all abit if/maybe/sketchy just wanna get her right again.
So as always cheers in advance for any help/advice you fella's might share