good callOriginally Posted by Logg
red would be nice
good call
Any news on these logg?
Just had mine powder coated today for free
The flanges have not been cut yet so no sign of any mounts yet. Sorry lads I am ringing the fabricator daily so when I know anything you guys will.
They looks good with posh paint on them Jon.
Flanges are now with the fabricator hopefully he'll crack on with them soon.
I won't ask for any money till they're finished and in my hands as his they'll be done tomorrow can mean next week.
Flanges are now with the fabricator hopefully he'll crack on with them soon.
I won't ask for any money till they're finished and in my hands as his they'll be done tomorrow can mean next week.
sounds good
dont worry to much about the time frame , what with the cold weather at the moment, most peeps are unlikley to be in a mad rush to get out there and get it on
You guys will be doing better than me I'd been waiting for first set since September and my new downpipe and other bits I'm still waiting. The other two fabricators I tried to use where evern worse only seemed interested in easy work.Soon as that's ready I'm out and fitting everything no matter the weather.
But as soon as I know you guys will.
Last edited by Logg; 03-02-2012 at 11:21.
Right I've got the first set of mounts sat here who's needing them first out of you lads on the list? Can post them out Tuesday next day delivery or collection from the Ace Cafe on Monday (French car night)
The fabricator has sprayed them in gray primer. So untouched my hammerite brush strokes. lol
so posted its £115.50 including the PayPal fees or £100 cash collected
Mate, can you put me down for a set... Will give you cash on Monda
Hi mate no need for cash until I have the more mounts in my possession as these are so slow at getting made.Mate, can you put me down for a set... Will give you cash on Monda
But on a brighter note I have my five back on the road with v8 mounts all round. There's no extra dash rattles or vibration. Bit of luck it will be at the Ace Monday if anyone wants to have a look.
cash ready and waiting adn teh sooner the better as i plan to get my engine in end of feb.. has that first set gone yet dude.. if not drop me a pm with paypal details and ill fire it over mate.
First one is yours dude. PM on route.
Hi mate no need for cash until I have the more mounts in my possession as these are so slow at getting made.
But on a brighter note I have my five back on the road with v8 mounts all round. There's no extra dash rattles or vibration. Bit of luck it will be at the Ace Monday if anyone wants to have a look.I should have my new engine going in in the next couple of weeks! Dont suppose you got any ideas on timescales?
Would be good to see your R5
Not he's a bit hit and miss. :'(
But even with the engine I've swapped these inside an hour.
Ahh damn missed these ones. Moneys waiting here aswell dude, give me a pm next time you have a spare set, or can pay now and u send a set whenever you get them? Regards andy
Well I'm over his workshop again tomorrow. So hopefully they'll be some more waiting for me.
Is there a meet on Monday at Aces cafe?But on a brighter note I have my five back on the road with v8 mounts all round. There's no extra dash rattles or vibration. Bit of luck it will be at the Ace Monday if anyone wants to have a look.
Still havent fitted mine, ive been slack as **** lately! Might do it this weekend
Don't you be neglecting those guns Brigsy.
Yeah Ace cafe has a French car night on the 3rd Monday of the month. Normally a good turn out of us RTOC guy at this.
Money ready and waiting, just pm me when there available, thanks
Mounts sent out today to the lads.
I've three more sets left.
sorry sure this has been said countless times but how much for a set?
£100 collected or £110 postedsorry sure this has been said countless times but how much for a set?
Just fitted these to mine and I gotta say, Logg top work fella the fit is near perfect, I say near perfect as the hole in the top of drivers side braket so u can access the nut on mount just needs moving over to the drivers side by 3 maybe 4mm just to let a socket to clear abit easier, other than that there perfect fella.
I was thinking I was going to have to fit a forth mount on mine to prevent engine movement but now combined with Scoff's rear mount it doesn't move at all
Great parts fella, well done
Just fitted these to mine and I gotta say, Logg top work fella the fit is near perfect, I say near perfect as the hole in the top of drivers side braket so u can access the nut on mount just needs moving over to the drivers side by 3 maybe 4mm just to let a socket to clear abit easier, other than that there perfect fella.
I was thinking I was going to have to fit a forth mount on mine to prevent engine movement but now combined with Scoff's rear mount it doesn't move at all
Great parts fella, well done
I'll second this Logg, not fitted mine yet, but noticed I was going to have to open the hole up a little to aid tightening the nut..
Great bits of kit
Glad you got them safely fellas and thanks foor the feed back.
Yeah i did notice the engine side hole needed moving slightly after the first batch and asked for it to be moved but the man with the lazer cutting forgot.
Last edited by Logg; 29-02-2012 at 05:06.
Can I have some of these??
Big thanks to Andy for sorting these mounts out!!
Got mine today and I'm very pleased with them!!
Just a shame I'm so far off actually getting them fitted!!
Steve
Fitted mine today. First impressions seem very good, there is a little bit of vibration at idle but that was to be expected.
I have only been for a short test run as the weather is bad. On acceleration i have noticed the back end squats straight away as the forces transfer through the car rather than the mounts first. Definitely get 10/10 from me, im off to the fast show at pod next week so ill test them to destruction
me too log ole buddy....
With national day sneaking up on us all is there any more people that want some front engine mounts. Can get Paul to make a little batch for me to bring to the event.
£110 posted uk mainland
£100 collected
Last edited by Logg; 26-06-2012 at 04:38.
National day batch of mounts.
1) jesus in the seat of a 5
hello buddy...i wont b at national day but can i have a set fella...looking at the feed back on them a great buy
National day batch of mounts.
1) jesus in the seat of a 5
2) Bigfoot
Sorry my little RTOC bud's but uncle Logg will not be bring any engine mounts to national day as only three is not enough to get a batch made and would of put the prices up to get made. Five would of been the minimum.
Last edited by Logg; 24-07-2012 at 05:56.
Will these still be made once you got 5 on your list?
Yep once I've five people I can have them made.
Just don't have £200 at the mo to have tied up in unsold pair of mounts. As I did that last time
I have pm'd u but thought I would post here as well, Can u put me down for a set please. Thanks Mike
1) jesus in the seat of a 5
2) Bigfoot
3) Kentraider
4) mike's r5
Just one more person needed and I can give the fabricator the nod to start on them.
I am only interested in 1 mount (Engine side), if you can do only one you can put me on the list.
Tkanks
Pedro
New poster! (less than 10 posts)
Can put me down for a set Cheers
Thats what I like to hear with 5 on the list
Ok everyone I'll get onto the fabricator and see when he can get these done.
Hi Pedro I'm not too sure about posting to Portugal as If I did It would have to be fully insured and tracked which I'd imagine would not be cheap.
Last edited by Logg; 01-08-2012 at 14:31.
Spoke to Paul the fabricator last night he say's the shop that does his laser cutting is shut for the next three weeks and then I'm away the end of August.
So at best it'll be early mid September now.
Sorry guys.
will have to wait then
Pm sent fella
Due to the amount of time and trips to the fabricator it takes to get these made and the hefty sum of my own cash i have to put in upfront I won't be getting more made. Unless my car needs major fabrication work again so am doing the trip anyway.
Sorry guys
Turbo Ted has a full set for sale.
https://www.rtoc.org/boards/showthread.php?t=31043
Posting Permissions
Reply With Quote
