-
Non-member
Saab reds...
Ive swapped over my standard injectors for the saab reds, i thought id start it first without a bypass hole, idle 10.0 on afr misfiring to hell so ive created a bypass hole, ive mad the bypass hole 32mm and its idling ok 13.5 afr and revving up fine, hesitates slightly when blipping the throttle, i cant take it out because of this bloody weather so im just keeping my fingers crossed it will fuel ok on boost tomorrow, would any of you lads be able to tell me do you think it will fuel ok on the reds with a 32mm bypass, well fuel well enough not to run lean, going to adjust boost in a min and fine tune to 21psi on first run on rollers, thanks for any advice chaps
-
Non-member
Re: Saab reds...
I have just fitted a hard pipe intake so cut out a 32mm hole idled well and was ok off boost but when on boost missfired n went into 9s. Cut another 32mm hole made them into an oval and slipped a sillicone connector for the pipe over and slide it up and down to adj the size of the hole pikey
-
Non-member
Re: Saab reds...
What boost were you running mate?
-
Non-member
Re: Saab reds...
1bar at mo but when new actuator comes 1.5bar
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules