Results 1 to 32 of 32
  1. #1
    Non-member
    Join Date
    Jan 2009
    Location
    norwich
    Posts
    1,059
    Post Thanks / Like

    what am i doing wrong

    as some of you will know ,ive been trying to improve on my f7p conversion rwd 5, but i just cant seem to get over the 300bhp mark,maybe im being greedy or to optomistic with what ive got, but it is really bugging me, i have so far played around withe the standard cams (and piper 270 inlet cam), bigger throttle body and recently fitted a bigger pwr chargecooler,
    but i just cant seem to make the numbers, what are other members making and running and what inlet/ exhaust manifolds /turbos/and cams are being used to make higher numbers,

    my engine so far consits of -
    f7p flowed head megane inlets and williams exhaust valves
    pwr 6x8 cooler
    76mm diameter boost pipes
    80mm throttle body
    3" exhaust sytem (1m long in total including silencer)
    log manifold
    gt3071r with .63 exhaust housing
    standard f7p cams with no overlap




    intend to fit a pressure gauge to the log manifold next week, to measure pressure outputs,or am i wasting my time and efforts, with the fault being somewhere else i.e turbo, dont want to splash out on a set of turbo high lift cams when i probabley could'nt use the extra lift/flow anyway

    could it be my log manifold holding me back or turbo spec
    would a fabricated equal length manifold be my answer
    any thoughts or ideas would be a great help,

  2. #2
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: what am i doing wrong

    Quote Originally Posted by HAndy View Post
    as some of you will know ,ive been trying to improve on my f7p conversion rwd 5, but i just cant seem to get over the 300bhp mark,maybe im being greedy or to optomistic with what ive got, but it is really bugging me, i have so far played around withe the standard cams (and piper 270 inlet cam), bigger throttle body and recently fitted a bigger pwr chargecooler,
    but i just cant seem to make the numbers, what are other members making and running and what inlet/ exhaust manifolds /turbos/and cams are being used to make higher numbers,

    my engine so far consits of -
    f7p flowed head megane inlets and williams exhaust valves
    pwr 6x8 cooler
    76mm diameter boost pipes
    80mm throttle body
    3" exhaust sytem (1m long in total including silencer)
    log manifold
    gt3071r with .63 exhaust housing
    standard f7p cams with no overlap




    intend to fit a pressure gauge to the log manifold next week, to measure pressure outputs,or am i wasting my time and efforts, with the fault being somewhere else i.e turbo, dont want to splash out on a set of turbo high lift cams when i probabley could'nt use the extra lift/flow anyway

    could it be my log manifold holding me back or turbo spec
    would a fabricated equal length manifold be my answer
    any thoughts or ideas would be a great help,

    Take a look @ Turbo Ted's 5 running around 400bhp on f7p with standard cam's

  3. #3
    Non-member 5teve L's Avatar
    Join Date
    Jan 2003
    Location
    RH12
    Posts
    2,328
    Post Thanks / Like

    Re: what am i doing wrong

    I wonder if it's the manifold ?
    I know Robbie runs a tubular one, I always wondered if the log mani would flow enough but was assured it would flow 350 according to BB... or do you have a different one ?

    Edit, actually it does sound like it could be restricting things, maybe the printout would shed more light ?

  4. #4
    Non-member
    Join Date
    Jan 2009
    Location
    norwich
    Posts
    1,059
    Post Thanks / Like

    Re: what am i doing wrong

    Quote Originally Posted by 5teve L View Post
    I wonder if it's the manifold ?
    I know Robbie runs a tubular one, I always wondered if the log mani would flow enough but was assured it would flow 350 according to BB... or do you have a different one ?

    Edit, actually it does sound like it could be restricting things, maybe the printout would shed more light ?

    running the bb log manifold
    my rr print out is almost a mirror reflection of ted,s first rr prin outs,


    any ideas what turbo/boost he is running to make those numbers

  5. #5
    Ireland Area Rep turbo ted's Avatar
    Join Date
    Sep 2008
    Location
    Ireland Co. Kilkenny
    Posts
    645
    Post Thanks / Like

    Re: what am i doing wrong

    hi there HAndy
    my engine spec is
    forged pistons and rods,standard crank,standard head and cams standard inlet manifold and standard throttle body have no issues with throttle responce.
    cheap china copy t3/t4 turbo rated to 350bhp,custom exhaust equal length manifold.
    mapped at 18psi made---267lbft-----323hp.
    mapped at 28psi made---345lbft-----393hp.with a 2psi boost leak.
    ecu and loom supplied and fitted by the mad scientist SCOFF
    and all mapping has been done by SCOFF to get this power.
    all i can say is HAndy get your car up to the mad scientist.

  6. #6
    Non-member 5teve L's Avatar
    Join Date
    Jan 2003
    Location
    RH12
    Posts
    2,328
    Post Thanks / Like

    Re: what am i doing wrong

    Quote Originally Posted by turbo ted View Post
    hi there HAndy
    my engine spec is
    forged pistons and rods,standard crank,standard head and cams standard inlet manifold and standard throttle body have no issues with throttle responce.
    cheap china copy t3/t4 turbo rated to 350bhp,custom exhaust equal length manifold.
    mapped at 18psi made---267lbft-----323hp.
    mapped at 28psi made---345lbft-----393hp.with a 2psi boost leak.
    ecu and loom supplied and fitted by the mad scientist SCOFF
    and all mapping has been done by SCOFF to get this power.
    all i can say is HAndy get your car up to the mad scientist.
    I still reckon it could be down to the manifold design.
    That 3071 should easy make the numbers Andy, hell I'm hoping my journal bearing version of the 2871 will get me close to Robbie.

  7. #7
    Non-member
    Join Date
    Jan 2009
    Location
    norwich
    Posts
    1,059
    Post Thanks / Like

    Re: what am i doing wrong

    Quote Originally Posted by turbo ted View Post
    hi there HAndy
    my engine spec is
    forged pistons and rods,standard crank,standard head and cams standard inlet manifold and standard throttle body have no issues with throttle responce.
    cheap china copy t3/t4 turbo rated to 350bhp,custom exhaust equal length manifold.
    mapped at 18psi made---267lbft-----323hp.
    mapped at 28psi made---345lbft-----393hp.with a 2psi boost leak.
    ecu and loom supplied and fitted by the mad scientist SCOFF
    and all mapping has been done by SCOFF to get this power.
    all i can say is HAndy get your car up to the mad scientist.
    Hi ted


    what rpm was your peak torque ( for the 345lbft) ?

    also what was your air temps ?

    did you ever try the log manifold before going to the tub manifold

    thanks

  8. #8
    Non-member stu21t's Avatar
    Join Date
    Sep 2008
    Posts
    725
    Post Thanks / Like

    Re: what am i doing wrong

    Possibly not very helpful but that turbo on a cossie is pushing 500bhp so very much doubt its that.

    Also wouldnt an 80mm throttle body make responce a bit slow? That would flow 800+
    65mm would be plenty.

    A poor log manifold would be the first place i look.


    Thinking about it, if youve reached the limit of flow on the manifold then no matter how much more boost you put in, it wont come out... And it will up the charge temps. It will allso back up heat from the exhaust manifold into the head/inlet/boost, again causing the air temp to rise.
    Last edited by stu21t; 11-11-2011 at 23:06.

  9. #9
    Ireland Area Rep turbo ted's Avatar
    Join Date
    Sep 2008
    Location
    Ireland Co. Kilkenny
    Posts
    645
    Post Thanks / Like

    Re: what am i doing wrong

    hi andy
    peak 345 lbft was at 5600rpm,
    peak 393 hp was at 6100rpm,
    air temps where not monitored when it made these figures as this was at the rolling day at wgt 3 weeks ago,scoff mapped up my car to 28psi on the road and estimated it was near the 400hp mark 4 weeks before the rolling road day.
    i will be going back up to scoff again before christmas for some fine tunning on his new rollers

  10. #10
    Non-member
    Join Date
    Jan 2009
    Location
    norwich
    Posts
    1,059
    Post Thanks / Like

    Re: what am i doing wrong

    Quote Originally Posted by stu21t View Post
    Possibly not very helpful but that turbo on a cossie is pushing 500bhp so very much doubt its that.

    Also wouldnt an 80mm throttle body make responce a bit slow? That would flow 800+
    65mm would be plenty.

    A poor log manifold would be the first place i look.


    Thinking about it, if youve reached the limit of flow on the manifold then no matter how much more boost you put in, it wont come out... And it will up the charge temps. It will allso back up heat from the exhaust manifold into the head/inlet/boost, again causing the air temp to rise.
    to be honest, the 80mm throttle is very responsive,to the point it reaches full flow at 45%pedal travel, but with the size of the turbo it is still drivable until around 3300rpm ,then begins too pull very hard up to higher rpms. found the 16v double throttle plate before was quite unresponsive below 3000 rpm,(25mm ) that and the quoted prices for the renault tps sensors for that t/b where really silly money, and unavailable new anymore i cut off the tapered neck of the inlet manifold and had the throttle plate welded straight on
    as regards the exhaust manifold.... yeah ,its been one of the few items i haven't changed. after reading the hype it can flow 350-400 hp

    on the rollers the air temps stayed around 34-36 degrees upto around 4500rpm and then climbed quickly just touching 60 degrees at 6200 rpm, but as soon as it was backed of the throttle the air temps came back down very quickly to the 30's again losing 1-2 degress of heat every second, so quite happy with the effectiveness of the charge cooler set up

  11. #11
    Non-member
    Join Date
    Jan 2009
    Location
    norwich
    Posts
    1,059
    Post Thanks / Like

    Re: what am i doing wrong

    just like to say thankyou.... steve,ted,stu for the fast reply's to my ongoing saga, cheers guys

  12. #12
    Non-member
    Join Date
    Jan 2009
    Location
    norwich
    Posts
    1,059
    Post Thanks / Like

    Re: what am i doing wrong

    oh and james5 , thought i'd missed someone out

  13. #13
    Member
    efi-parts.co.uk
    Scoff's Avatar
    Join Date
    Aug 1998
    Location
    Liverpool
    Posts
    4,558
    Post Thanks / Like

    Re: what am i doing wrong

    Quote Originally Posted by HAndy View Post
    standard f7p cams with no overlap
    Hi Andy, what do you mean by the above ?

  14. #14
    Non-member Andrew Cooke's Avatar
    Join Date
    Sep 2008
    Location
    Oxfordshire
    Posts
    3,160
    Post Thanks / Like

    Re: what am i doing wrong

    you've taken a 130hp engine, lowered the compression, fitted a log manifold and boosted it. I can't see it making it more than 125 na, so 300hp would take about 1.4bar boost?

    How badly are you doing?

    To me it's the log manifold, it's a great thing for knocking up a quick reliable 270hp, but it's no performance item. I'm sure it's the reason why your hotter cams didn't work.

    http://www.full-race.com/articles/Bs...st_writeup.pdf

    I think you'll need your cams and the manifold to make it sing.

    Which turbine housing are you using? Is it the 3" 4 bolt GT one?

    Btw, how rich is he fuelling it? He used to map them really rich, bordering on black smoke rich, he's an old dog, but maybe he's learnt some new tricks

    I'm guessing all this of course, so feel free to ignore me

  15. #15
    East Midlands Regional Rep Os8472's Avatar
    Join Date
    Sep 2008
    Location
    Ragging the tits off my car :)
    Posts
    2,813
    Post Thanks / Like

    Re: what am i doing wrong

    Quote Originally Posted by Andrew Cooke View Post
    you've taken a 130hp engine, lowered the compression, fitted a log manifold and boosted it. I can't see it making it more than 125 na, so 300hp would take about 1.4bar boost?

    How badly are you doing?

    To me it's the log manifold, it's a great thing for knocking up a quick reliable 270hp, but it's no performance item. I'm sure it's the reason why your hotter cams didn't work.

    http://www.full-race.com/articles/Bs...st_writeup.pdf

    I think you'll need your cams and the manifold to make it sing.

    Which turbine housing are you using? Is it the 3" 4 bolt GT one?

    Btw, how rich is he fuelling it? He used to map them really rich, bordering on black smoke rich, he's an old dog, but maybe he's learnt some new tricks

    I'm guessing all this of course, so feel free to ignore me

    To be fair to Dave I watched the fueling and it was spot on, not rich at all, yes I know he has a rep formapping on the safe side but at the end of the day I'd prefer safe and reliable to out and out power thats ready to pop at any given moment.

    But as I said both the fueling on mine and Andy's were spot on, mine didn't make the power cus the turbo is too small and as for Andy's my first thought was the cams but thinking about it the manifold ain't the best in the world

  16. #16
    Non-member
    Join Date
    Jan 2009
    Location
    norwich
    Posts
    1,059
    Post Thanks / Like

    Re: what am i doing wrong

    Quote Originally Posted by Andrew Cooke View Post
    you've taken a 130hp engine, lowered the compression, fitted a log manifold and boosted it. I can't see it making it more than 125 na, so 300hp would take about 1.4bar boost?

    How badly are you doing?

    To me it's the log manifold, it's a great thing for knocking up a quick reliable 270hp, but it's no performance item. I'm sure it's the reason why your hotter cams didn't work.

    http://www.full-race.com/articles/Bs...st_writeup.pdf

    I think you'll need your cams and the manifold to make it sing.

    Which turbine housing are you using? Is it the 3" 4 bolt GT one?

    Btw, how rich is he fuelling it? He used to map them really rich, bordering on black smoke rich, he's an old dog, but maybe he's learnt some new tricks

    was running this beforehttp://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=tp&Product_Cod e=ATP-HSG-043&Category_Code=GTH

    I'm guessing all this of course, so feel free to ignore me

    any ideas are good ideas , and your guessing is bob on most of the time
    with regards to the turbine housing its a .63 5 bolt gt/ internal actuator /on a25 flange plate with a 5 bolt 3" v band exhaust flange http://www.atpturbo.com/mm5/merchant..._Code=ATP-FLS1 on the 25 flange plate, was running this before http://www.atpturbo.com/mm5/merchant...egory_Code=GTH with an adapter to the manifold,which leaked all the time, possibly due to different heat expansions of the log /adapter plate/turbo flange, that and it was just to laggy on its own without the supercharger, nice full race article thread there by the way, got anymore about header lengths/profiles vs ftlb/hp etc, that would be really nice

  17. #17
    Non-member
    Join Date
    Jan 2009
    Location
    norwich
    Posts
    1,059
    Post Thanks / Like

    Re: what am i doing wrong

    would it be worth while investing in a set of high lift turbo profile cams from somebody like catcams,once ive got the tubby manifold fabricated fitted and breathing alot more,could there be more gains to be had or keep with what ive got with the( lower power band and more usable power )standard ish cams and make do , not looking to push the start of the power band to far up the rpm range

    or save the cash and start purchasing the materials and 02j/m gearbox flywheel/clutch etc ready for the inevitable to happen

  18. #18
    Non-member Logg's Avatar
    Join Date
    Sep 2008
    Posts
    1,558
    Post Thanks / Like

    Re: what am i doing wrong

    Quote Originally Posted by HAndy View Post
    on the rollers the air temps stayed around 34-36 degrees upto around 4500rpm and then climbed quickly just touching 60 degrees at 6200 rpm, but as soon as it was backed of the throttle the air temps came back down very quickly to the 30's again losing 1-2 degress of heat every second, so quite happy with the effectiveness of the charge cooler set up
    That's just what my pwr cooler use to do so went fmic and now and only see 15 degrees above ambient and almost an instant temp drop to ambient on gear change.

  19. #19
    Non-member Andrew Cooke's Avatar
    Join Date
    Sep 2008
    Location
    Oxfordshire
    Posts
    3,160
    Post Thanks / Like

    Re: what am i doing wrong

    Quote Originally Posted by HAndy View Post
    any ideas are good ideas , and your guessing is bob on most of the time
    with regards to the turbine housing its a .63 5 bolt gt/ internal actuator /on a25 flange plate with a 5 bolt 3" v band exhaust flange http://www.atpturbo.com/mm5/merchant..._Code=ATP-FLS1 on the 25 flange plate, was running this before http://www.atpturbo.com/mm5/merchant...egory_Code=GTH with an adapter to the manifold,which leaked all the time, possibly due to different heat expansions of the log /adapter plate/turbo flange, that and it was just to laggy on its own without the supercharger, nice full race article thread there by the way, got anymore about header lengths/profiles vs ftlb/hp etc, that would be really nice
    When you're doing the turbo and exhaust you might want to consider swapping the turbine housing:
    http://www.atpturbo.com/mm5/merchant...egory_Code=GTH
    http://www.atpturbo.com/mm5/merchant...egory_Code=TTH
    (confirm fitment)

    As to lengths etc I can only offer my opinion - copy the Williams manifold and use a nice smooth collector, have I seen these for sale somewhere?
    T3 flange, external gate, blah...

  20. #20
    Non-member Andrew Cooke's Avatar
    Join Date
    Sep 2008
    Location
    Oxfordshire
    Posts
    3,160
    Post Thanks / Like

    Re: what am i doing wrong

    Quote Originally Posted by HAndy View Post
    would it be worth while investing in a set of high lift turbo profile cams from somebody like catcams,once ive got the tubby manifold fabricated fitted and breathing alot more,could there be more gains to be had or keep with what ive got with the( lower power band and more usable power )standard ish cams and make do , not looking to push the start of the power band to far up the rpm range

    or save the cash and start purchasing the materials and 02j/m gearbox flywheel/clutch etc ready for the inevitable to happen
    either way you're going to need to sort the gearbox...

    What happened to your previous cams? They sounded OK to me. I don't think you need turbo cams, fast road cams is what you want, especially if you can play with cam timing. I don't think the manifold on it's own will do a whole lot now that you've 'optimised' the cams to work with a cork in the exhaust

  21. #21
    Non-member Andrew Cooke's Avatar
    Join Date
    Sep 2008
    Location
    Oxfordshire
    Posts
    3,160
    Post Thanks / Like

    Re: what am i doing wrong

    Quote Originally Posted by Logg View Post
    That's just what my pwr cooler use to do so went fmic and now and only see 15 degrees above ambient and almost an instant temp drop to ambient on gear change.
    just spotted that, 60C is slit your throat territory. That CC isn't keeping up, do you have a pic of the installation?

  22. #22
    Non-member
    Join Date
    Jan 2009
    Location
    norwich
    Posts
    1,059
    Post Thanks / Like

    Re: what am i doing wrong

    Quote Originally Posted by Andrew Cooke View Post
    just spotted that, 60C is slit your throat territory. That CC isn't keeping up, do you have a pic of the installation?
    not to hand cheif, but with regards to layout it lives tight to passenger side rear turret with the inlets/outlets facing front/rear of car , with 1x 90 bend connecting of turbo comp and 1x90 bend connecting to throttle body, all lagged with aluminum heat wrap, inlet/ outlet of cc is 76mm o/a dia which ive kept the same from the turbo outlet to throttlebody(ie no restriction,however the cc core feed pipes are 25mm and my boschpump is 19mm diameter,and the pre rad is 16mm, something i need to change, try and keep all pipe work to 25mm where possible?
    perhaps a bigger pre rad?current size 600x280mm

  23. #23
    Non-member
    Join Date
    Jan 2009
    Location
    norwich
    Posts
    1,059
    Post Thanks / Like

    Re: what am i doing wrong

    total length of cc coolant pipework run must be getting on for approx 6m
    not enough room in the back for pre rad /intercooler , unless i go nuts and fit a super scoop to the roof or rear side window


    any ideas ?

  24. #24
    Non-member
    Join Date
    Jan 2009
    Location
    norwich
    Posts
    1,059
    Post Thanks / Like

    Re: what am i doing wrong

    Quote Originally Posted by Andrew Cooke View Post
    either way you're going to need to sort the gearbox...

    What happened to your previous cams? They sounded OK to me. I don't think you need turbo cams, fast road cams is what you want, especially if you can play with cam timing. I don't think the manifold on it's own will do a whole lot now that you've 'optimised' the cams to work with a cork in the exhaust
    still got them tucked up nice and safe never chuck anything

  25. #25
    Non-member Logg's Avatar
    Join Date
    Sep 2008
    Posts
    1,558
    Post Thanks / Like

    Re: what am i doing wrong

    Rather than just a larger pre rad try a second it was the only thing I didn't try and everyone that seems to have measured good temps with a cc on a 5 have seemed to use two.

  26. #26
    Member
    efi-parts.co.uk
    Scoff's Avatar
    Join Date
    Aug 1998
    Location
    Liverpool
    Posts
    4,558
    Post Thanks / Like

    Re: what am i doing wrong

    Quote Originally Posted by Os8472 View Post
    at the end of the day I'd prefer safe and reliable to out and out power thats ready to pop at any given moment.
    There's a big margin between overly safe and "going pop at any given moment" That is not a slight against anyone by the way but that statement is wildy unfair to those tuners that spend the time to get the balance right.

  27. #27
    Member
    efi-parts.co.uk
    Scoff's Avatar
    Join Date
    Aug 1998
    Location
    Liverpool
    Posts
    4,558
    Post Thanks / Like

    Re: what am i doing wrong

    Quote Originally Posted by HAndy View Post
    standard f7p cams with no overlap
    That still confuses me, does that mean you have moved far away from standard timing ?

  28. #28
    Non-member
    Join Date
    Jan 2009
    Location
    norwich
    Posts
    1,059
    Post Thanks / Like

    Re: what am i doing wrong

    Quote Originally Posted by Scoff View Post
    That still confuses me, does that mean you have moved far away from standard timing ?
    sorry scoff bit confusing,reduced overlap
    was not thinking to straight when i first posted that up, thinking of a million and one things

    how could i confuse the mad scientist

  29. #29
    Non-member Andrew Cooke's Avatar
    Join Date
    Sep 2008
    Location
    Oxfordshire
    Posts
    3,160
    Post Thanks / Like

    Re: what am i doing wrong

    isn't Blocky the mad scientist? now I'm confused

  30. #30
    Committee, Moderator Matt Cole's Avatar
    Join Date
    Sep 2008
    Location
    Durham
    Posts
    5,259
    Post Thanks / Like

    Re: what am i doing wrong

    Quote Originally Posted by Andrew Cooke View Post
    isn't Blocky the mad scientist? now I'm confused

    Nope he's just a pervert!

  31. #31
    Committee Member Sparkie's Avatar
    Join Date
    Aug 2008
    Location
    Tipton
    Posts
    3,085
    Post Thanks / Like

    Re: what am i doing wrong

    do you think 1 x bosch pump will have enough umph to flow water round the entire CC circuit effectively?

  32. #32
    East Midlands Regional Rep Os8472's Avatar
    Join Date
    Sep 2008
    Location
    Ragging the tits off my car :)
    Posts
    2,813
    Post Thanks / Like

    Re: what am i doing wrong

    Quote Originally Posted by Scoff View Post
    There's a big margin between overly safe and "going pop at any given moment" That is not a slight against anyone by the way but that statement is wildy unfair to those tuners that spend the time to get the balance right.
    Yes there is a big margin but I've seen at least 3 tuners push it too far just to get abit more than the other guy, ok the 3 I've seen do this have since gone under but it's not unheard of.

    All I'm saying is I'd rather know that I've got someone mapping my car on the side caution instead of just getting power hungry.

    Unfortunately the mapping industry is like the building industry, you get the guys who do consistent quality work but you also get the guys who do frankly **** work who bad mouth others just to get abit of work (that's not aimed you Scoff, your work is great), if Dave's was **** he wouldn't still be the industry would he.

    Anyway enough of this back on topic, Andy you've now done cams back to stock and it's made a difference but I gotta agree that manifold has got to costing you power, there is nothing else it could be, just think about it this way fella, you've got plenty of space to get somit made up, I'm dreading the day I have to look at something made for mine as space is very tight

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •