-
Non-member
finding TDC
I got a b18ft from haz with no cam in it,
i have since picked up a cam but not sure how to find tdc to fit the cam,since tdc marks are on the cam pully
is there a mark anywere else?
i did read about removing sparkplug and cranking engine till you feel a suction but doesnt sound very accurate.......
-
Non-member
Re: finding TDC
there is a mark on the crank pulley, also there is a plug at the front of the engine if you remove this a rod can be inserted into the crank when at tdc
-
Non-member
Re: finding TDC
Have you still got your timing belt protective cover? Theres a square cut out on this cover with a pointer on it, you line the cam pulley up with that.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules