Results 1 to 6 of 6
  1. #1
    Non-member CHUNK The Goonies's Avatar
    Join Date
    Sep 2008
    Location
    Durham
    Posts
    230
    Post Thanks / Like

    breather probs.

    New poster! (less than 10 posts)

    My bro,s 5 is sucking air constantly thru the air filter at quite a high rate and making a swirrly blow joby noise.. ive been told that there must be some breathers missing??? thing is been to renault (know fuxk all) and they say there is no breathers in pipes for the 5, i know different.. does any1 know part numbers for these breathers so i can ram them hard and fast down the little tits head at renault..

    help needed quickly to save another 5

  2. #2
    Non-member OUTLAW's Avatar
    Join Date
    Sep 2008
    Location
    ENGLAND
    Posts
    298
    Post Thanks / Like

    Re: breather probs.

    Name:  hoseDIAGRAM.jpg
Views: 25
Size:  96.1 KB

  3. #3
    Non-member OUTLAW's Avatar
    Join Date
    Sep 2008
    Location
    ENGLAND
    Posts
    298
    Post Thanks / Like

    Re: breather probs.

    theres maybe not breathers in pipes...but they might be one way valves inside the original reno pipes????

  4. #4
    Committee, South East Regional Rep James5's Avatar
    Join Date
    Aug 2002
    Location
    RH13
    Posts
    6,045
    Post Thanks / Like

    Re: breather probs.

    You mean restrictors within the breather system, there are 2, 1 is between the T piece and the inlet manifold, and the other goes between the swirl pot and the T piece.

  5. #5
    Non-member Brigsy's Avatar
    Join Date
    Sep 2008
    Location
    Redcar
    Posts
    4,138
    Post Thanks / Like

    Re: breather probs.

    Sounds like the restrictor is missing out of the breather pipe that goes to the inlet manifold to the t-piece mate, or the pipe has split.

    If the restrictor is missing use a plastic car valve dust cap, make a 1mm hole in the middle & fit it inside the pipe near the t-piece, jobs a good'en.

  6. #6
    Committee, Moderator Matt Cole's Avatar
    Join Date
    Sep 2008
    Location
    Durham
    Posts
    5,259
    Post Thanks / Like

    Re: breather probs.

    Quote Originally Posted by Brigsy View Post
    Sounds like the restrictor is missing out of the breather pipe that goes to the inlet manifold to the t-piece mate, or the pipe has split.

    If the restrictor is missing use a plastic car valve dust cap, make a 1mm hole in the middle & fit it inside the pipe near the t-piece, jobs a good'en.
    Yeah just to clarify, the pipes fitted are of a larger diameter and look a bodge job. The restrictors i doubt are there. I used a soldered mig tip on my last engine, seemed to do the trick.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •