Results 1 to 13 of 13
  1. #1
    Non-member Harrison01's Avatar
    Join Date
    Sep 2008
    Location
    Luton
    Posts
    191
    Post Thanks / Like

    it only ruddy runs !!!

    New poster! (less than 10 posts)

    well after 5 years of being off the road the old girl actualy started today. spent 2 days trying to get her back to life, seized fuel pump, suspect fuel relay etc etc.

    still plenty to do but a major stepping stone out of the way.

    Just a few questions,

    when i turn the ignition on should the fuel pump start straight away and continue running? ( with the relay in place this currently does not happen, linked out relay and pump comes on).

    the choke light stays on whether its up or down? is this an earthing fault? the light goes off when i turn the headlights on.

    what is she supposed to idle at. roughly?

    sorry for all the questions but im over the moon.....

  2. #2
    Non-member Tiny Tim's Avatar
    Join Date
    Oct 1999
    Location
    Bournemouth
    Posts
    1,568
    Post Thanks / Like

    Re: it only ruddy runs !!!

    About fricking time mate

    1. No... the pump will only engage when it recieves a signal from the TDC sensor - i.e, when you're cranking/car is running

    2. Choke light should go out when not in use - check the clamp on the carb, you may have set it too tight.

    3. Idle speed should be circa 800rpm

    Happy days mate, get some pics up.

  3. #3
    Non-member The new Bill J's Avatar
    Join Date
    Apr 2002
    Posts
    2,937
    Post Thanks / Like

    Re: it only ruddy runs !!!

    Quote Originally Posted by Tiny Tim View Post
    3. Idle speed should be circa 800rpm
    Factory idle speed is 650+/- 50rpm.

  4. #4
    Non-member Tiny Tim's Avatar
    Join Date
    Oct 1999
    Location
    Bournemouth
    Posts
    1,568
    Post Thanks / Like

    Re: it only ruddy runs !!!

    Quote Originally Posted by The new Bill J View Post
    Factory idle speed is 650+/- 50rpm.
    My bad. Where the hell did I get 800 from? Modern cars I guess.

  5. #5
    Non-member Harrison01's Avatar
    Join Date
    Sep 2008
    Location
    Luton
    Posts
    191
    Post Thanks / Like

    Re: it only ruddy runs !!!

    cheers tim, the choke cable aint too tight as it works fine without sticking and works also when starting from cold and/or hot.


    Quote Originally Posted by Tiny Tim View Post
    About fricking time mate

    1. No... the pump will only engage when it recieves a signal from the TDC sensor - i.e, when you're cranking/car is running

    2. Choke light should go out when not in use - check the clamp on the carb, you may have set it too tight.

    3. Idle speed should be circa 800rpm

    Happy days mate, get some pics up.

  6. #6
    Non-member Harrison01's Avatar
    Join Date
    Sep 2008
    Location
    Luton
    Posts
    191
    Post Thanks / Like

    Re: it only ruddy runs !!!

    try get picks up later..

  7. #7
    Non-member scratcher's Avatar
    Join Date
    Sep 2008
    Location
    Milton Keynes - ish
    Posts
    1,583
    Post Thanks / Like

    Re: it only ruddy runs !!!

    good job mate, hopefully i'll see it kickin about soon

  8. #8
    Non-member Sy5GTT's Avatar
    Join Date
    Mar 2006
    Location
    Deepest Wilts
    Posts
    686
    Post Thanks / Like

    Re: it only ruddy runs !!!

    Quote Originally Posted by Tiny Tim View Post
    My bad. Where the hell did I get 800 from? Modern cars I guess.

    My idle's set at 1000. Keeps the oil pressure up.

  9. #9
    Non-member Shane P's Avatar
    Join Date
    Jan 2006
    Posts
    870
    Post Thanks / Like

    Re: it only ruddy runs !!!

    Quote Originally Posted by Sy5GTT View Post
    My idle's set at 1000. Keeps the oil pressure up.
    Doesnt it sound like its ticking over a bit fast?

  10. #10
    Non-member Sy5GTT's Avatar
    Join Date
    Mar 2006
    Location
    Deepest Wilts
    Posts
    686
    Post Thanks / Like

    Re: it only ruddy runs !!!

    Not really mate. Sounds quite nice.

  11. #11
    Non-member jantheeven's Avatar
    Join Date
    Sep 2008
    Location
    Sittard, Netherlands
    Posts
    533
    Post Thanks / Like

    Re: it only ruddy runs !!!

    Mine's set at 900... didn't even know the factory setting is that low! I'll try lowering it tomorrow... see how it sounds and runs

  12. #12
    Non-member bye_all_c_ya's Avatar
    Join Date
    Sep 2008
    Location
    walsall
    Posts
    649
    Post Thanks / Like

    Re: it only ruddy runs !!!

    set mine at 850 everytime never had problem

    i think it depends on the car myself

  13. #13
    Non-member Misky's Avatar
    Join Date
    Sep 2008
    Location
    Oldham, Greater manchester
    Posts
    563
    Post Thanks / Like

    Re: it only ruddy runs !!!

    Yeh it will depend on the car, and how often it has been ran.
    Mine was sat for 4 years when i bought it.
    Its currently running at 900

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •