Originally Posted by
Os8472
Well it all depends on how you want to build it
all new parts or scavange parts from a scrappy, I did a mix of both.
An emerald or adaptronic ecu are gunna be the most exspensive parts at around 500quid
the fuel injectors I got cost 75quid for a set of 4
fuel pressure reg cost anything from 35 upto 200+ quid
Its possible to reuse the factory fuel pump and lines but I wanted to change mine so I got an escort cossie fuel pump from a scrappy for 10quid and the Steel braided FIA race approved lines cost 100quid (exspensive I know but look much nicer aflow twice what the factory jobs could)
All the basic sensors cost around 90quid total
you'll need some form of crank position reference, you could get the flywheel machined but I just had a trigger wheel welded to the bottom pully, they cost around 20quid
I used a mitsuibishi starion throttle body from a scrappy costin 15quid
then comes the inlet manifold, they can be as cheap or as exspensive as you like depending on who makes it, average I've seen em cost around 400quid
The ignition coil shouldn't cost anymore then 45quid unless your keeping the dizzy
Your HT leads will replacing with supressed leads to reduce electronic noise, the spark plug will need to be changed to resisted plugs for the same reason
thats all I can think of right now