Re: New BRIGHT ORANGE OE Dial Replica's

**Trevhib** · 10-11-2009, 11:04

32 out of 35 of the original is pretty darn good.

Who are the 3 originals who haven't coughed up in time? If there isn't a good reason, it needs to be noted for future group buys (i.e. payment is required up front from anyone who has previously let the side down).

**clee** · 10-11-2009, 14:28

All gone now people ..
Well done Big Steve for sorting this and all those that showed their support

I'm waiting on the envelopes still but have a made a start writing out all the address labels

**The new Bill J** · 10-11-2009, 14:43

Spell my name right this time

**clee** · 10-11-2009, 14:55

Ohhh don't worry Pat ....I'm sending yours special delivery

**The new Bill J** · 10-11-2009, 14:57

Oooooh, I feel honoured

**dangerous dave** · 10-11-2009, 17:23

poor show guys, why couldn't some of you just bail out at the end like normal

looks like the group buy dropouts have left the club now

**Brigsy** · 12-11-2009, 12:51

Received my dials today, Look awesome going to fit them soon

**clee** · 12-11-2009, 15:21

All the rest have just been posted

First class post or AirMail .

Brigsy got his early protected in a hoodie .

**Hoolio** · 12-11-2009, 15:52

Originally Posted by clee

All the rest have just been posted

First class post or AirMail .

Brigsy got his early protected in a hoodie .

I was really looking forward to getting home and checking my mailbox. (not that i was expecting them yet, brigsy's post got me excited)

**Brigsy** · 12-11-2009, 19:26

Look awesome fitted

**rat1** · 12-11-2009, 21:34

can't wait to get my dials.thought i have a go on an old set first as the speedo is broken it won't matter if i messed them up.i came up with this may be helpful if you can't get good picture .i used an old envelop as it was a bit stiffer ,cut it a bit bigger than the dial,the speedo and revcounter take out the screw and push through the paper an screw it back on hold it down an cut it to shape then mark the end of the needle,i found you have to have the clocks laying flat because of the balance weight in the needle.the fuel /oil/temperature gauges you have to take them out .after some time of being careful not to damage the little peg ,i thought was plastic but turned out to be metal,gave a good push from the back then gripped the top with a pear of pliers an twisted it out didn't seem to damage it.do the same as the speedo with the paper.becareful pulling the needle off.i hope this is helpful it worked for me. Attachment 4424 Attachment 4425 Attachment 4426 Attachment 4427

**rat1** · 12-11-2009, 21:41

11112009677.jpg 11112009681.jpg 11112009700.jpg 11112009701.jpgsome pictures of how i did it

**Hoolio** · 13-11-2009, 11:44

Just had mine

though I did wonder what the hell the envelope with the "Funky Dory Party Bags" sticker on the back actually was. Nice suprise

Both styles of fuel gauge as well, bonus.

**JRP** · 13-11-2009, 12:24

Just got mine through, seems strange that a blond lady in a big black 4x4 merc just deliverd them..... now im confused i thought royal mail were sending them... but in person delivery is all good!

**Logg** · 13-11-2009, 12:26

Mine have turned up

thanks Clee for the fast dispatch as normal.

And yet another thank you to Steve and Bill! and everyone else involved.

**Mart** · 13-11-2009, 14:14

Received mine. I didn't know it was Lockwood who had produced these copies!?

They're spot on though

Nice work Steve, Bill, Clee

**Gttnutter** · 13-11-2009, 15:21

Yep mine also arrived today also...

Again thanks steve and clee they look spot on

**phase i 16 v turbo** · 13-11-2009, 16:02

Got my parcel this morning ! Many thanks to all involved.

**J$£5GTT** · 13-11-2009, 16:49

there here!!!!,cheers stevo an evo bill for color choice....

these puppies look so fresh may just keep them in the pack an
frame them!!!...

J

**mikey_r5gtt** · 13-11-2009, 17:14

Big thanks to all involved. Received mine this morning

**tonesGTT** · 13-11-2009, 17:46

these puppies look so fresh may just keep them in the pack an
frame them

**p whack** · 13-11-2009, 18:31

New poster! (less than 10 posts)

dammit not happy i missed out

**Big Steve - Raider** · 13-11-2009, 18:47

Can all of those who missed out on a set this time please put your name down here so we can see who's interested in getting another set made??

1)

**Rob@Backyardracing** · 13-11-2009, 18:56

Just arrived home to find a bent in half envelop hanging out my letter box

i didnt want to open it at first

but i did and there ok thank fook.....

cheers chaps....

**Big Steve - Raider** · 13-11-2009, 19:00

Originally Posted by Rob@Backyardracing

Just arrived home to find a bent in half envelop hanging out my letter box

i didnt want to open it at first

but i did and there ok thank fook.....

cheers chaps....

**clee** · 13-11-2009, 19:00

Fooking cooonts

what about ' please do not bend ' do they not understand

Glad they are OK

**David H** · 13-11-2009, 19:33

Originally Posted by Big Steve - Raider

Can all of those who missed out on a set this time please put your name down here so we can see who's interested in getting another set made??

1) David H

**The new Bill J** · 13-11-2009, 19:44

Got mine this morning as well. I haven't had a chance to compare them to the originals in natural light yet, but they look pretty good

Thanks to Lee, Steve, Lockwood, anyone else, and of course myself

If another famous rtoc list is going to be started, would it be an idea to start a fresh thread, with a link to it in this one? Some people who missed out the first time round might miss a post in the middle of this (currently) 7 page thread.

**Alastair** · 13-11-2009, 20:10

Got mine today and have to say they are first class. Thanks to all involved, big up RTOC.

**raj** · 13-11-2009, 20:23

recieved mine today

now all im after is a guide on how to change/fit the new ones withput snapping and or misaligning the needles

**p whack** · 13-11-2009, 20:26

New poster! (less than 10 posts)

Originally Posted by David H

1) David H

2) peter davies

**Trevhib** · 13-11-2009, 20:29

Originally Posted by raj

recieved mine today

now all im after is a guide on how to change/fit the new ones withput snapping and or misaligning the needles

You mean like the one about 15 posts up Raj?

Removing the needles just needs some modified tweezers or some such to slide under the centre and pull upwards carefully.

**raj** · 13-11-2009, 20:44

Originally Posted by Trevhib

You mean like the one about 15 posts up Raj?

Removing the needles just needs some modified tweezers or some such to slide under the centre and pull upwards carefully.

sorry but the pics above arnt enough for me, all im saying is the last time i fitted a set of while dials, i prised the needles off but when i pressed them back on they didnt read the same as before

sooo im not really that confident on doing this

didnt someone mention they were going to do a "detailed"guide.?

**clee** · 13-11-2009, 20:49

Yeh ,It was Big Steve ...Lazy fecker ! Get on with it !
Then again it all depends on how good you are at following instruction

**Trevhib** · 13-11-2009, 21:02

Originally Posted by raj

sorry but the pics above arnt enough for me, all im saying is the last time i fitted a set of while dials, i prised the needles off but when i pressed them back on they didnt read the same as before

sooo im not really that confident on doing this

didnt someone mention they were going to do a "detailed"guide.?

Aye, fair enough mate. No point in rushing and cocking it up if you're not confident.

**Wallace** · 14-11-2009, 00:07

BIG BIG THANKS!! Once again to Big Steve,Clee and Bill and any others involved in the group buy............

They are the nuts - really really happy with them

**Lomo** · 14-11-2009, 09:02

Arrived yesterday and can honestly say I wasnt that excited about something arriving through the post since my tax rebate was due! Brilliant!! Thanks alot to all concerned and cant wait to put themin the car! Well done everyone and it's things like this that make RTOC so cool

**Big Steve - Raider** · 14-11-2009, 09:41

Originally Posted by clee

Yeh ,It was Big Steve ...Lazy fecker ! Get on with it !
Then again it all depends on how good you are at following instruction

Sorry I'm a bit tied up at the NEC at the moment.

**clee** · 14-11-2009, 09:45

Is your shammy worn out yet

**dangerous dave** · 14-11-2009, 10:58

1) David H
2) peter davies
3)dangerous dave
4)dangerous dave
5)dangerous daves mate.. will pay for all 3 upfront if needed

**v8ndy** · 14-11-2009, 14:02

First post!

Originally Posted by dangerous dave

1) David H
2) peter davies
3)dangerous dave
4)dangerous dave
5)dangerous daves mate.. will pay for all 3 upfront if needed

6)v8ndy, i`ll have 2 sets if there`s any left over

**clee** · 14-11-2009, 15:03

I'll have a word with Ian about getting another 15 or so in stock

**Slim** · 14-11-2009, 15:08

can i have some pls

**dangerous dave** · 14-11-2009, 17:20

Originally Posted by clee

I'll have a word with Ian about getting another 15 or so in stock

i dont think theres any reason not to stock a handful in the rtoc shop, they will sell to rtoc members or non members.. slip a set on ebay and i bet a few people would juice themselves at OE replacement dial covers

got your rtoc warehouse sorted yet?

**clee** · 14-11-2009, 17:31

Got the warehouse shelving ready for 30000 Bigfoot spark plugs ....due in next week

**J$£5GTT** · 14-11-2009, 17:57

Originally Posted by clee

Got the warehouse shelving ready for 30000 Bigfoot spark plugs ....due in next week

**Alistair Gresty** · 14-11-2009, 20:47

Got mine today, thanks to everyone involved in organising this

**gtmatt** · 15-11-2009, 17:40

Got mine ,what great work to every 1 who made it happen thanks again matt

**Kris M** · 15-11-2009, 20:30

i havent had mine yet

**clee** · 15-11-2009, 20:36

Posted to the hanger Kris ..

Thread Tools