ok no worries
anyone got any tips for un-doing these nuts? they were right fiddly when i last took them off as the wheel kept on spinning as i tryed to undo them.
i cant put it into gear and do it that way as the shaft is half hanging out
ok no worries
anyone got any tips for un-doing these nuts? they were right fiddly when i last took them off as the wheel kept on spinning as i tryed to undo them.
i cant put it into gear and do it that way as the shaft is half hanging out
My bodge to do this on JRP's car was ram a big flat head screwdriver between the brake disc vents and the caliper and then use a long handled braker bar and stood on the braker bar and used my body weight (11 1/2 stone) with a little bounce and it eventually came undone enough for me to undo it by hand (caliper and brake disc actually survived aswell).
just blob a bit of loctite on the threads. peace of mind!
just wondering if i was corect with the wish bones . £10 say i am . or your gonna have to get be a big bottle of vodka
i think my bet is well safe
[quote=raj;85917]your getting me totaly wrong those wishbone in the picky are not for the 5gtt those in the picky are for a 9/11 . i have given you mesurments for the hole for the gt not those in the picky , have another look and measure the hole on the wish bones that are in the picky
i feel a big bottle of vodka comming my way
and i dont mean a 75. i wont at least 1.0l
ok okaaaay havent had time to even look at the car.
its my day off tomorrow so will find out soon enough
I must agree, the wishbones they have supplied you are not 5 gt turbo ones, have you not got your old ones to compair them too, you will see the triangle hole in the center of the wishbone is much smaller on a 5 wishbone.
compare yours with this one
http://www.k-tecracing.com/show_product.asp?id=2075
just take the wishbones back to gsf without the polly bushes but with the org bushes thay cam with tell them the prob . be nice to them and they should be able to correct the problem . told ya them wishbones were wrong
PS dont forget my vodka
they must be miles out
ive just stripped all the o/s suspension down and measured the the wishbones from the pimple to the oposite side of the triangle hole and it measured just under 50mm
QUICK QUICK
im just about to refit the struts, so could someone tell me which strut top goes on which side of the car?
didn't you ask this before?
the one on the left goes on the left
is your car left or right hand drive?