As title suggests, i'm looking for an intake trumpet type thingy to replace a headlight on a pair of Morrettes like this:
But where do i get one from?? Any ideas??
Who owns this Skeete car now BTW??
As title suggests, i'm looking for an intake trumpet type thingy to replace a headlight on a pair of Morrettes like this:
But where do i get one from?? Any ideas??
Who owns this Skeete car now BTW??
You got them as part of the old GT Tuning "ram raid" induction kit. I'm sure someone's got one lying around somewhere. Word of warning though, they're worth about £250
Credit crunch Billski, they've crashed...
http://www.rallydesign.co.uk/index.php?cPath=321_1856
Originally Posted by The new Bill J
You got them as part of the old GT Tuning "ram raid" induction kit. I'm sure someone's got one lying around somewhere. Word of warning though, they're worth about £250
Oh dear, have they gone the same way as the Devil Strut brace....??
Which also equates to the fact that like the strut brace you've got a couple lying around & it's going to cost me that to get one off you!!
http://www.merlinmotorsport.co.uk/AI...c18/index.html
May be of some use Steve?
Cheers Sy, thanks for the link!!
I'm just considering the shame of putting one of these bad boys in there!!
http://www.merlinmotorsport.co.uk/p5...duct_info.html
Might look better in Raider Blue..
Don't worry it's for the VAG Clio B1tch!
YUK, they look a bit tacky!
Remember, the GT Tuning one features the full 987 degree rolled end, and looks so much more professional.
Steve, why would I have any lying around?
I don't have any spares, as Mart found out last week
I don't have any spares, as Mart found out last week
Duz the GT Chooning wunz got reel krome then?
I've got a GTT trumpet if you need one Steve...
"Positioned inside the filter is a 'Group A' Ram Pipe. This is C.N.C. machined from solid HE30 aluminium, allowing a full 270º rolled edge, optimum trumpet shape and a counterbore at the narrow end to prevent a 'step' on the inside."
"Positioned inside the filter is a 'Group A' Ram Pipe. This is C.N.C. machined from solid HE30 aluminium, allowing a full 270º rolled edge, optimum trumpet shape and a counterbore at the narrow end to prevent a 'step' on the inside."
And there's me thinking it was just a shiny trumpet.
As if! This is GT Tuning, rememberAnd there's me thinking it was just a shiny trumpet.
i made mine out of some grill mesh, looks tidy in imo, oh tweeks sell them too, trumpits that is
im sure i got mine from ebay , £10 for 2
I like it but i'm not going to put a ring on it!!!
I'll have that baddical boy if that's cool with you mate!
you get them with the pipercross vipers aswell
you can buy them seperate from pipercross i think ther like 25 quid
mayb im wrong but if youve got a demon tweeks catalogue lying arouns have a look in there
I like it but i'm not going to put a ring on it!!!
I'll have that baddical boy if that's cool with you mate!
PM/email ya address bad bwoy, and I'll fire it down to ya.
happy 1000 posts btw mart
hahahhaa
Sad as it is, I had well over 20k posts on the old forum
I have one from the viper kit left over if anyone is interested.
I'll pick it up off ya when i'm up in a few weeks GEEEZ
PM/email ya address bad bwoy, and I'll fire it down to ya.
I've seen a Fiesta and the guy chopped an old back box and done one out of that. Looked nice aswell as it didn't hang out loads.
surely you should be using one of these?
wrong colour andy, lol
y not just use a plastic port from bass box
about £3 from maccess and prob ebay to
black plastic but you could paint it
or do what i did on the cab and repipe the air filter so it pokes out of the hole a couple of inches
there ya go stevie get ur ass down to the localwrong colour andy, lol
y not just use a plastic port from bass box
about £3 from maccess and prob ebay to
black plastic but you could paint it
or do what i did on the cab and repipe the air filter so it pokes out of the hole a couple of inches
boombastic shop,bitchin idea!!!!
i got mine from ere....
http://www.venairsport.co.uk/product...roducts_id=613
lucky it came with x2 trumpets since somebody nicked the 1st one when i went to york! wont happen now tho since i smoothed it in
made a canny difference once i plumbed it into the BMC
Posting Permissions
Reply With Quote
