Rust!!

[bernard]

Now that ive got my handling, braking, and engine sorted its time to move on with the body work I set about removing all the trims to see what I could find mainly the bad spots I found was in the sill areas and quite amazed to find all the arches in really good condition Ive got my friend coming round to do the welding on saturday so I shall share the progress with you lot. with the picture of the sill with the fairly big hole in it do you think it would be ok just to cut the rot out and weld a section in as I dont really fancy having the whole sill replaced due to funds whats your opinons on how theses areas should be treated?thanks

[Markey Mark (BD)]

I can't see a problem with doing that mate, to be honest its what i done with mine. Just make sure all the rotten metal is removed no matter how far it goes in and underseal all the new metal going in.

[James5]

Sam, your Hub bolts to strut are facing the wrong way in this pic matey whilst it's all of you might aswell turn them around
http://i43.photobucket.com/albums/e3...o/100_4829.jpg

[djinuk]

persoanlly man looking at that sill front and back, i would stump up the cash and get the lot replaced mate, seems a shame to just patch it up, that what they do with fords and the like :P

[dgdogz]

id agree....patching them would only do for a little while i reckon
save for a little bit and just do the whole lot...
ul have years of no worries

[michael tierney]

if u do decide to do it,make sure u do your front jacking up points as well !!

[dangerous dave]

you got lucky there, its not all that rotten so get in there and save that little fecker

[J$£5GTT]

save a renaults life today- use por 15 !!!!
swear to god its the shiz!

[jesus in the seat of a 5]

save a renaults life today- use por 15 !!!!
swear to god its the shiz!

i second that badger ....

[5teve L]

Nah, thats beyond repair mate, sell it to me & i'll reshell it

Mate, thats feck all really, i had to do a shed loads on the missus car before the last ticket, still got the scars from the welding

[scratcher]

Mine was much worse than your's is. I had the rust cut out and plated up. Mine was on the inner sills too which wasn't too great.
Its a shame its gone up to your side decals

[bernard]

I think as long as all the rot is cut out and repaired, treated well I should be ok. Yeah one of the jacking points needs doing also.

Im also thing thinking about having the car re rustproofed at this place http://www.rustmaster.co.uk/ anyone used them, Id rather pay them to do it rather than me stuck under the car for days getting covered in sh*t.

Also does anyone still make up the side decals dont fancy paying £150+ for a set. would be cool to have a black set.