Thought I would start this thread as I know how useful it can be to get some help and assistance with ND (well RTUK Festival) only a week away. What issues or problems do you have (car related)? What parts do you required (I dont mean bigger turbo either!)? or just need hug?:
Just over a week to go
- Romil Davda (Staines): Oil breather set up breathing very heavy. dont think its something I can fix before ND, so will just go on track as it is. Also need to get tracking done but no biggie.
Originally Posted by Romil Davda
Thought I would start this thread as I know how useful it can be to get some help and assistance with ND (well RTUK Festival) only a week away. What issues or problems do you have (car related)? What parts do you required (I dont mean bigger turbo either!)? or just need hug?:
Just over a week to go
- Romil Davda (Staines): Oil breather set up breathing very heavy. dont think its something I can fix before ND, so will just go on track as it is. Also need to get tracking done but no biggie.
make sure no blocked breather's, Compression test Romil
Petrol. Chester.
Romil are you gonna rub a sponge over your car
LOL standard for all big events dude... although she's only gonna get dirty driving up!Romil are you gonna rub a sponge over your car
See below mate:make sure no blocked breather's, Compression test Romil
https://www.rtoc.org/boards/showthread.php?t=33687
Oh drivers side headlight stopped working too (HID's fitted), getting power to unit but not from unit to bulb! Will revert back to standard.
Finish fitting the roll cage
Stop oil leaking from the sump plug
Quick check over
A good wash!
Does strip down engine bay, put all new brackets on, sort out manifold core plug, re-wire dash, get through MOT.
And not here for Saturday afternoon/sunday this weekend as going to watch F1
Dale - Have fun this weekend... I hear they have tickets available to buy at the gate!
- If roll cage is a "show cage", you can save some time and pass... but knowing you, if you've started, you've got to finish... Mr OCD!
- Washer for sump plug?
Oh I will
Hmmmmm
Refit box to engine
Have exhaust temp bung welded in to manifold
Refit turbo manifold
Refit turbo and plumb it all in
Refit wastegate
Make and fit new screamer pipe
Refit injectors and rail and fuel lines
Refit starter motor
Refit engine
Refit rads and pipe work
Refit chargecooler and pipe work
Wire it all up and have MOTed
Wash and done
Might be other stuff I need to do too lol
Only problem is I don't have any time to work on the car till after NDso going in my daily ride
Volvo (Tow car):
Steering arms
New tyres
Repaired DIM
Fuego (Track Ho)
New tyres (not arrived yet)
New brakes
Buy fuel....lots and lots of fuel.
Wash car
Apply some decals
A show cage?! wash your mouth out Romil, you know me better than that!I'll seal it up
Not much for me.
Re-build and re-fit front callipers
Clean / re-grease rear calliper hand brake mech and slide pins (one already done)
Bleed brakes
Adjust hand brake
Re-Ft big rad
Re-fit charge cooler
Engine & gear box oil
Tappets
Fit new top hat bearings for front suspension
Mount slicks to cup rims
Good bloody clean!
Quick oil change on the megane and ready to go.
Take all my tools out of Fluffy (weekend work horse) and give her a quick once over.
Finishing making exhaust downpipe and wrap it,
replace passenger front wheel bearing
sort out drive shaft gatter as its sh&t itself
set up fueling as running low 10 on boost
finish wiring so all willy gauges work
Bleed air from brakes and ABS modulator
pray the SAAB T25 i've just bolted on actually works
FFS! will we have any cars on track?!?!
Brigsy - No van? Did you get the box sorted?
TNT Andy - I need a hand putting up my tent
Andy M - Battery sorted?
As for the rest, only 1 weekend to go...
I've been speaking to James5 and we recon I got an issue with the rings. I won't be going on track as if she fooks up on track, it may spoil it for others! I am picking up an engine on Saturday and will try and fit this on Sunday but need an engine crane and a new water pump (plus gaskets). Its a real long shot but I want to get on track. There is too much to do to the other white 5: Change wheels, tracking, petrol tank leaking, fit starter motor, fit carb, fit boost hoses, adjust boost, fit AFR gauge (once removed from other 5), do tappets, fit rear arch (but dont have screws/bolts),
Chuck all my stuff in Jamie's car
Get in mine
Roof down
Fuel stop
Rock and roll...
Well my cars been dropped at bodyshop just so i need/having done:
Full respray.
Pick up wheels from powdercoaters the weekend.
Make seat mounts for new bucket seat.
Sort out air intake for fogs at work.
Pick up engine from marky mark and refit it all.
Freshen up paint on rollcage.
Finish other dash and get that and all bits flocked.
Then what ever other little bobs need sorting/freshening up
So all in all a full rebuild within a week
Gonna be tight as! dont think il make to saturday hopefully il be at pod though. (Use the saturday to get all car together and sorted)
Get decals fitted.
Fit New thermostat
Job done.
Change oil in the cup car
Fill with fuel
Thrash liberally
I need to pass my driving test. Fingers crossed and I can be on track then
I thought you already had a forklift licence!
that drink driving caught up with you... just keep to the shandy's in futureI need to pass my driving test. Fingers crossed and I can be on track then
Not yet mate. Im not sure how good the box is so might get it rebuilt before fitting.
Get a big 2ltr plastic bottle catch tank whacked on your gtt... Vent holes in the top like mine
Forklift is not a licence, just a competence test.
Just about the same state as last year for me HG has a leak as loosing water but still boosting but not spending anymore money onit untill this engine comes out and I will rebuild it and sell it on. Then Volvo lump will go in over winter. So no track action at blyton. But I may give it a shot up pod
That'll do for you.
Not coming to the ND, but for the retro show on the Sunday I just need to get some graphics on the sides
Romil, just go for it! A couple of years back at Mallory, Tony drove his car there and back (3.5 hours each way) with melted piston AND he did the track day! Just get a big catch tank like Brigsy said and pour the oil back in when it fills up!
Pussy - what do you think gaffer tape was invented for?FFS! will we have any cars on track?!?!
Brigsy - No van? Did you get the box sorted?
TNT Andy - I need a hand putting up my tent
Andy M - Battery sorted?
As for the rest, only 1 weekend to go...
I've been speaking to James5 and we recon I got an issue with the rings
And btw - I'm the tent guy.
What time are you up there? I'm looking at getting there for 2'30-3.00
Change oil in the cup car
Fill with fuel
Thrash liberally
I would but its mostly water that collects! Will fit a larger bottle as advised, if I dont get the other one sorted!Just get a big catch tank like Brigsy said and pour the oil back in when it fills up!
Andy - I am meeting Stuart/Alex at 2pm @ Enfield. Wont be getting to Blyton before 5/6pm mate. I'll drop you a text when we are close by and you can get the tea ready
Iv had to repair my king lead for the 2nd time this week... i should really buy a new one
change a CV Boot
Battery all sorted mateFFS! will we have any cars on track?!?!
Brigsy - No van? Did you get the box sorted?
TNT Andy - I need a hand putting up my tent
Andy M - Battery sorted?
As for the rest, only 1 weekend to go...
I've been speaking to James5 and we recon I got an issue with the rings
Plan on getting most of the jobs sorted this weekend + got half of next week off work to sort last minute issues too.
Good luck with your engine mayhem! Should have no problems changing it out in one day
Wash, clay, single stage polish, gucci wax, petrol.
That should vet me to pod and back. Haha.
sort my nearside brake light out. Think its the brake pedal switch itself.
Clean, wax, load my gear, petrol
then
Got to put a silencer on the cup car and cv boot.Hopefully that's it.
Go Pigsnake!Got to put a silencer on the cup car and cv boot.Hopefully that's it.
Go Pigsnake!
You doin blyton too m8? Camping?Got to put a silencer on the cup car and cv boot.Hopefully that's it.
Oh...go on then...lets sling these on
NICCCCCEEEEEEEEOh...go on then...lets sling these on
You planning on trying to keep up with me in the corners Dave
Dam I hope the brakes work this year LOL - more aggressive pads up front and fresh oem rears, roughed up discs, fresh racing fluid FTW
Just that rad that could not cool enough last year so no point turnign the boost up atm
Looking forward to seeing your beastie in action Dave
DG
Just got to get a good nights sleep and get away from work early....
then as always, I'll check the tyre pressures after about 50 laps,
I'm going to give it some stick, lets put it that wayNICCCCCEEEEEEEE
You planning on trying to keep up with me in the corners Dave
Dam I hope the brakes work this year LOL - more aggressive pads up front and fresh oem rears, roughed up discs, fresh racing fluid FTW
Just that rad that could not cool enough last year so no point turnign the boost up atm
Looking forward to seeing your beastie in action Dave
DG
I'm sticking to a bar of boost as we're not on race fuel and the temps. Plus its only the second outing in seven years!
Driveshaft
Suspension top
That's it if she blows she blows
If I can get there my mrs is in hospital she tells me Togo but I don't know what todo for the best (20week pregnant) as you know we miscarried earlier in the year so were worried it happening again..
I really want to go but something's are more a priority..
Hope you all enjoy it if I'm not there I will try and get to pod..
Have fun.
Cheating *******.Oh...go on then...lets sling these on
I hope it throws it down all weekend.
( it wont , but you are properly cheating )
Posting Permissions
Reply With Quote
