Oil return pipe

[Wallace]

What do people do when their oil return on the sump is the phase 1 style (smaller) and the oe hose is too big?

I've got a massive oil leak from the hose to the sump, basically because I've over tighten the jubilee to compensate and its split the oe 90degree pipe!

the diameter of the hose I guess is around 25mm, and the sump metal pipe is around 15mm (guesstimating)

I have had a look on Mikes site, but from what I can tell, the phase 1 pipe is from turbo to metal return leading to the sump?!

[Nottswoody]

I went to the scrap yard and got the rocker return oil feed off a focus for a £1 perfect bend and you can cut the length.. 1yr on and still perfect bargin..

[Mart]

Samco (or it could've been SFS) do a 90deg' reducer pipe. Probably be able to find a cheaper Chinese equivalent on Ebay.

[Mart]

Eg,

http://www.ebay.co.uk/itm/25mm-to-16...item45f4be0854

[Brigsy]

Cheap chinese silicone reducer as mart said, job done

[Wallace]

Excellent

Thank you guys

Relieved cause at first thought it might of been the turbo that was fubared

[Wallace]

Eg,

http://www.ebay.co.uk/itm/25mm-to-16...item45f4be0854

Being lazy Mart

Is that the right size: 25mm -16mm?

[Wallace]

SORTED


Thanks again fellas