finaly got my arse in gear to find out the turbo i have fitted to my Camparse
it's a TB2536 Model - 465589-3
all i know is its a turbo i like it cos it's off a master derv van and it works on my CAMPARSE. plus it spools up fast when needed not a monster booster 1.5 bar is about all it goes to but dam when it gets going it real fun
the thing is it getting a little tired and need a refurb.
so the question is were can i get a seal refurb kit at a very cheapo price
anyone
Parts list: http://www.turbomaster.info/eng/garr...65589-0003.php
Surely Adam can refurb' it for you?
Hope you're keeping well mate
thanks Mart
ive tryed getting hold of Adam but no luck. ide rather him sort it out than just any monkey. ile try again
and im not to bad . onwards and upwards as they say
Hi Colin, I used CR Turbo for the rebuild on my t25:
01452 638426
http://www.crturbos.co.uk/
Great service although you do pay for it!
thanks Romil. ile give them a call if no luck with Adam
Just had mine done from a company round here great service great price and he has done a top job turbo rebuild.co.uk they r in preston
i spoke to adam today chap . i will pm his number over to make sure your callin the right numberOriginally Posted by THE MASTER
Here he is Colin
http://www.turborebuild.co.uk/
Ask for Danny his prices are very competive
cant get hold of adam even asked dawn no responce . so after alot of shopping around. and number crunching. ive found a kit at not to bad a price . ebay advert but i phoned and ordered
http://www.ebay.co.uk/itm/T2-TB25-TB...a93d1f0&_uhb=1
there is now a full kit with 360° bearing winging it's way to mine for £39.95 inc postage
Did you try getting Adam on here or by calling the shop mate? I know he rarely comes on here, if you call shop you got very good chance of getting hold of him thats how i get hold of him now for doing my turbo'scant get hold of adam even asked dawn no responce . so after alot of shopping around. and number crunching. ive found a kit at not to bad a price . ebay advert but i phoned and ordered
http://www.ebay.co.uk/itm/T2-TB25-TB...a93d1f0&_uhb=1
there is now a full kit with 360° bearing winging it's way to mine for £39.95 inc postage
i tried several avenues to get hold of Adam . the only one i didnt try was his parents . and i do have the number.
dont get me wrong i wasnt looking for a cheap job just wanted somone that i could trust to do the job propperly. and maybe Adam could put a few ££££ in his back pocket. but it's looking like Adam does not do (as we call them in the traid) private jobs..
i called the shop and spoke to adam on the shop number last week a lady on reception answered just asked for adam and he took the call. I do think the reason why most people cant get him on his mobile is he probably dosnt want to be bombarded with calls about prices and general info on turbos as i suppose at the end of the day he does have a job to do and its not his company
i might know the woman that answered . she threw me out the workshop wilts i was sorting out a turbo with Adam. hence why im not gonna call his work numberi called the shop and spoke to adam on the shop number last week a lady on reception answered just asked for adam and he took the call. I do think the reason why most people cant get him on his mobile is he probably dosnt want to be bombarded with calls about prices and general info on turbos as i suppose at the end of the day he does have a job to do and its not his company. i dont often have a go but she is not a nice woman
I Also had problems with Adam ,you should of contacted the above i am very happy with my turbo
well the kit has arived and ive started stripping the bogger (the left hand thread did not fool me ha ha ). dam it realy needs it . dont know the milage on it but im guessing over 100,000. like i said it was a free trubo that was whisltling when i took it off a master van . and just moved the housing to fit the 5
going to clean it up best i can digging out all the burnt on crud. oven cleaner seams to get alot of the crud off along with some light wire brushing .
the new kit comes with a 360 trust bearing so it all dfferent to wot im taking apart ..
nothing to loose apart from £40 AND A BIG LEARNING CURVE TO GAIN .. and ive got all winter to sort it out .... and ive found loads of youtube vids to help me out ...
he who dares ...........
do a guide with pics
well it's all built now and on camparse . and it works . no smoke and spools up fine .
who wonts there turbo rebuilt
New poster! (less than 10 posts)
R5 gt turb convert to injection yes or no guys?
haha how much master?well it's all built now and on camparse . and it works . no smoke and spools up fine .
who wonts there turbo rebuilt
yes good idea, no idea how it ended up in this thread tho?
Just rebuilt my first turbo today myself, a TD04 off a Saab aero, apart from the big circlip that holds the comp housing on, not as bad as I thought it would be.well the kit has arived and ive started stripping the bogger (the left hand thread did not fool me ha ha ). dam it realy needs it . dont know the milage on it but im guessing over 100,000. like i said it was a free trubo that was whisltling when i took it off a master van . and just moved the housing to fit the 5
going to clean it up best i can digging out all the burnt on crud. oven cleaner seams to get alot of the crud off along with some light wire brushing .
the new kit comes with a 360 trust bearing so it all dfferent to wot im taking apart ..
nothing to loose apart from £40 AND A BIG LEARNING CURVE TO GAIN .. and ive got all winter to sort it out .... and ive found loads of youtube vids to help me out ...
he who dares ...........
How bad were the bearings in the one you did fella?
Might get my knakered one back (see thread in turbo section) and have a go then if you guys reckon its worth a shot?
This would be very handy as a guide
Can someone do one please??????
Posting Permissions
Reply With Quote