GearBox Reinforcement

[dann]

I'm thinking in do something to reinforce the gearbox.

I saw pictures of reinforcements made and thought ... I want to do...

The question is the following ....

In that material?
Anyone have or know of reinforcement measures?

Look at the pictures....

Thanks fellas!!

[Tony Walker]

Its the circlip that holds the diff in place, they tend to pop out, ive not seen a 5s box do it but i have on newer renaults quite alot.
Ive seen the clips welded in, that kit looks good quality but over the top imo.

[Matt@CodeRedMotorsports]

Renault made the kit to hold the circlip in place. Jb0 rings a bell.

[dann]

Its the circlip that holds the diff in place, they tend to pop out, ive not seen a 5s box do it but i have on newer renaults quite alot.
Ive seen the clips welded in, that kit looks good quality but over the top imo.

Thanks for the info Tony!!

[dann]

Renault made the kit to hold the circlip in place. Jb0 rings a bell.

Really?? ooooooooh..

Have pics...or links to see ?... or sold? haha...

Thanks Matt!!

[Matt@CodeRedMotorsports]

Could try this??

http://www.ebay.co.uk/itm/Gearbox-re...ht_2118wt_1109


Can't find the Renault parts, as it may be service exchange repair.
Also, I have a few different gearboxes stored in the workshop, if I find one with the reinforcement, I'll measure it up for you.

[olidaviesuk]

Cough, cough.... A few.... When the Renault factory run out of spares im sure you're planning on selling them back to them at a reasonable rate

Could try this??

http://www.ebay.co.uk/itm/Gearbox-re...ht_2118wt_1109


Can't find the Renault parts, as it may be service exchange repair.
Also, I have a few different gearboxes stored in the workshop, if I find one with the reinforcement, I'll measure it up for you.

[dann]

Could try this??

http://www.ebay.co.uk/itm/Gearbox-re...ht_2118wt_1109


Can't find the Renault parts, as it may be service exchange repair.
Also, I have a few different gearboxes stored in the workshop, if I find one with the reinforcement, I'll measure it up for you.

Thanks you very much!! for help me Matt!!....

The ebay reinforce you post, is what i try to copy.... hihihi. shhhh! wooppshh!

[dann]

hello freinds!!...

I wanted to show the piece in AUTOCAD to see what you think.

mmm ..what I saw is the same for everyone, but can only change the depth (5.7mm my case), the rest is the same for everyone.

Greetings fellas!!