heeeeeeeeeeelp

[ADITEMALLICA]

hi, ive just ordered a mocal oil cooler and fitting kit for me phase two 5gt turbo,
it comes with a sandwich plate to fit where oil filter meets block, just wondered how do i remove the existing oil cooler sandwich plate to fit the new one??? many thanks in advance,,,,,

[jamie_clioGTT]

take the filter off and you will see a bolt with a hole all the way through. take that out and it should come off then..

p.s. you might have to take the edge off your engine mount if the new sandwich plate is the one with a thermostat.

[ADITEMALLICA]

take the filter off and you will see a bolt with a hole all the way through. take that out and it should come off then..

p.s. you might have to take the edge off your engine mount if the new sandwich plate is the one with a thermostat.

great thank you very much jamie just gota wait for the parts to arrive now lol

[jamie_clioGTT]

i cant remember the size of it but you should be able to get a deep socket on to it. its the bit that your filter screws onto that you want to be taking off. hope this helps dude.

[5teve L]

I think a 1" socket fits

[SCHWARTZ]

1"

[James5]

1"

Wallaby

[SCHWARTZ]

Wallaby

I should have known you'd be lurking.

[ADITEMALLICA]

grrrrrrrrrrrrrrrrrrrreat thanks very much everybody

[ADITEMALLICA]

i cant remember the size of it but you should be able to get a deep socket on to it. its the bit that your filter screws onto that you want to be taking off. hope this helps dude.

thanks jamie your a star, p.s had a look at ya clio and a read about it, very nice be smart to see it and hook up like...

[jamie_clioGTT]

sounds good, i often come up near you to MFN if youre about the next time its on.?