New poster! (less than 10 posts)
Hey folks.. just purchased a set of these for my phase 2 from hose solutions. got 2 braided hoses and also 2 L shaped black metal pipes..the hoses obviously join onto the L shaped pipes, but just wondering where the black pipe screws into.. do they go into the cooler on the radiator..
They're not essential mate, I didn't use mine, just screwed my hoses directly into the sandwich plate behind the oil filter.Originally Posted by TBM1397
New poster! (less than 10 posts)
Hey folks.. just purchased a set of these for my phase 2 from hose solutions. got 2 braided hoses and also 2 L shaped black metal pipes..the hoses obviously join onto the L shaped pipes, but just wondering where the black pipe screws into.. do they go into the cooler on the radiator..
New poster! (less than 10 posts)
Got the L pipes comeing out the sandwich plate on mine.
post pics when i can find if you want
Is this for the original cooler built into the 5GTT radiator?
You should make sure the bore through the fittings is large enough and the hoses don't kink and reduce the oil flow. Large enough I would guess should be the same as the original fittings or better.
Too little oil flow could mean rapid turbo failure, and soon after that, engine failure.
Ideally you should use an oil pressure gauge fitted to the top of the turbo.
New poster! (less than 10 posts)
if i can get away with not using them i wont, but if you could post a pic ALF that would be good..
New poster! (less than 10 posts)
New poster! (less than 10 posts)
nice one, cheers... might have to use them as ive moved my radiator over slightly.
Posting Permissions
Reply With Quote