hi guys ive just bought this compresor unit
https://www.rtoc.org/boards/attachmen...1&d=1287994521
it was in lovely condition with minimal play and it didnt smoke,
is it a t25 compressor? it says garrett ar 48 ktt
hi guys ive just bought this compresor unit
https://www.rtoc.org/boards/attachmen...1&d=1287994521
it was in lovely condition with minimal play and it didnt smoke,
is it a t25 compressor? it says garrett ar 48 ktt
Think thats off a nissan mate
do you reckon will it go on my r5 with an adaptor kit or something?Originally Posted by IANMM
Yeah prob but Adam L is ya man about turbos look in the contacts section for turbo developments and give him a call
thank you buddy i will give him a bell and see what he reckonsYeah prob but Adam L is ya man about turbos look in the contacts section for turbo developments and give him a call
Whats the turbine housing look like?
it didnt come with the housing unfortunately, only the compressor, i just took a punt on it as it was very very cheap. hoped i could do something with it. apparently they are SERIOUSLY laggy, with further research i think its off a gtir sunny or a 200sx 1.8. think i might just clean it up and put it on ebay.
its in great condition tho
sorry, i was thinking of the other half of the turbo, the back of it says .64 if that means anything.it didnt come with the housing unfortunately, only the compressor, i just took a punt on it as it was very very cheap. hoped i could do something with it. apparently they are SERIOUSLY laggy, with further research i think its off a gtir sunny or a 200sx 1.8. think i might just clean it up and put it on ebay.
its in great condition tho
Sounds like a T28 as you say of a pulsar or 200sx, defo to big a rear housing for the GTT, but might be possible for you to source a t25 .49 rear housing or even try and source a T2 .63 rear housing and have it machined to fit the the rear wheel you have on that turbo you have.
will putting a t25 rear onto it make it less laggy? or would it make no difference to the spool up at all. i spoke to adam at turbo developments briefly and he said that boost would prob kick in at 5000 rpm.., thats nuts.
yeah my old T28 kicked in at 4500rpm........lol i hated it
thats it, mind made up, FLOG IT.
If it is from a Pulsar you won't be able to just swap a small batty i.e. a .49 or even a .63 on it as they are huge .86 or something from memory and not compatible!
Maybe best to sell it on...
I did suggest it would be possible to have the rear housings machined out to allow exceptance of the bigger exhaust wheel, that depends on the size of the wheel that is.
Maybe it would be more suitable for the B18FT lads ?
So you did
I looked into it but was looking like a fair bit of hassle.
I'm pretty sure Haz stuck one on his volvo engine like Ganjaman says I'm sure someone will want it if you flog it
whos the B18FT lads mate?
It's bang on for the b18ft lot.
It's bang on for the b18ft lot.
i gave 50 for it, dunno really i was just going to polish it up a bit and ebay it. see what it went for.
I will have it for £50 notesi gave 50 for it, dunno really i was just going to polish it up a bit and ebay it. see what it went for.
75 you got a deal cos i will have to pay prob 15 in postage.I will have it for £50 notes
its got an actuator on it and water and oil pipes as well just thought id mention
pm sent
Posting Permissions
Reply With Quote