boost gauge help pease

[turbodave]

First post!

i have a boost guage wire up and its got vacume 30, 20, 10 0 and boost 10 20 30 40
when im driving normally off bost should it sit on 0?
mine sits on 20 vacume

[dave j gtt]

and then when you start to accelerate it gose up to 0 and then gose up to what boost you have if you floor it ....

sounds like its working and plumb in the right place

[djinuk]

out of interest, where abouts is the best place to plumb in a boost gauge.

[Shane P]

Either tap into the inlet manifold or cut the vacuum hose that runs from the AEI to the inlet plenum and put a T piece in it

[Penfold aka The Dealer]

Please remember that general chat is just for general chat... if you want technical advise you will need to join the club to ask them questions.

Current members please be carefull about answering tech questions in general chat to non members.

[Trevhib]

Please remember that general chat is just for general chat... if you want technical advise you will need to join the club to ask them questions.

Current members please be carefull about answering tech questions in general chat to non members.

Agreed. This has been concerning me a little over the last couple of weeks. Maybe there needs to be a standard polite moderator response and lock down that can be applied to any threads that start to become a bit too 'member only'.

That said, there needs to be some carrot to follow

[Trevhib]

Ooh, it's been moved!

[Tiny Tim]

That said, there needs to be some carrot to follow

Maybe we could try something similar to Schakal's thread the other day?


"JOIN THE CLUB NOW TO GET YOUR FREE NAKED LADY PHOTOS"

[Trevhib]

Naked Tim photos might also come in handy for something

[Trevhib]

Oh dear that came out all wrong

[Tiny Tim]

Naked Tim photos might also come in handy for something

Punnishing people?

[Trevhib]

Lol. Yeah you can get a nasty papercut from photo paper.

[BriC]

Lol. Yeah you can get a nasty papercut from photo paper.

So wait.. If you had a naked photo of Tim, your only worry would be getting a paper cut?

[Mart]

I've said it before, and I'll say it again; the boards should be blocked off completely (and that includes viewing them) from non-rtoc members.

[BriC]

Yeh - I agree about not being able to post, but surely you would want them to view some of the forum - i.e, general chat, so that they can 'taste the delights of RTOC'.

[Tiny Tim]

...so that they can 'taste the delights of RTOC'.

Alright, enough about me being naked now.

[paul b]

Alright, enough about me being naked now.

so , has the members "scratch and sniff" calendar been cancelled then>>>>??????

[dave j gtt]

I've said it before, and I'll say it again; the boards should be blocked off completely (and that includes viewing them) from non-rtoc members.

that was my veiw as well , but as no one listened and the sites as it is, would give the club a bad name people being alowed to post and then receive crap or no reply.

it needs sorting out i belive, had to answer the simple question because it had been asked and was allowed to be asked

[dave j gtt]

its not been moved its broke rules now dupiclated thread

[raj]

i disagree with non members not being able to see anything,
i think non members should only be allowed to go as far as the home page and not be able to click into anything else and go any further.
at least they get a glimpse.