-
Member
4 pot calipers 13" wheels
New poster! (less than 10 posts)
has anyone got 4 pot calipers on their 5 with 13" wheels?
i would like to have that setup as i have cup wheels but i have only found 4 pots for 15" or bigger wheels so far..
-
Non-member
Re: 4 pot calipers 13" wheels
It can be done, I know because I've seen it. I think they were a kit off an old school Mini or something.
Didn't do the car much good mind. I saw the car in a scrappy, with the steering wheel sticking out the sunroof.
Not. Good. At. All.
-
Committee Member
Re: 4 pot calipers 13" wheels
my guess it a metro turbo, as they used 4 pot calipers.
also austin princess/ambassador used em too.
-
Member
Re: 4 pot calipers 13" wheels
First post!
Didn't Willwood do a 4 pot kit with 255mm dia discs that fit under 13" wheels? Porbably not made anymore so you'd have to find a used set. Try Willwood anyway.
-
Member
Re: 4 pot calipers 13" wheels
-
Non-member
Re: 4 pot calipers 13" wheels
you might struggle to get anything other than a single pot sliding caliper under a standard steel wheel. There just isn't enough space for the pistons on the outside. Have a measure how much space you have between the disk face and the wheel, then look at some caliper drawings.
-
Non-member
Re: 4 pot calipers 13" wheels
-
Member
Re: 4 pot calipers 13" wheels
New poster! (less than 10 posts)
some good info here.thanks.The link for the Dyn 2 calipers look promising.i think that is a 2 pot.might be worth considering though.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules