Koni Adjustable which way??

[Matt Cole]

I have a set of front adjustable Koni(not coilovers). Is it clock wise to harden and anti clockwise to soften the rebound?

[Brigsy]

Iirc its clockwise to go harder on the rebound mate

[Matt Cole]

cheers sir!

[dave r5]

ok this may sound realy stupid an completly novice
but i have koni adjustales too, and have nether touched them as i dont know wat i need to do.

do u just turn them?
do they click or any thing?

[raj]

ANTI-clockwise = firm
Clockwise = soft

[Nick k]

The fronts, you turn the knob thing on the top of the leg under the plastic cover under bonnet, u can just about get to it.

The rears, you have to unbolt the shock one end and phyically turn the whole shock. 2/3 turn max to min i think.

I set mine to hard at the rear and middle on the front i think . Dunno?? Can't remember what i did last week to be fair! Not touched them since, can't be arsed!

[Matt Cole]

ANTI-clockwise = firm
Clockwise = soft

Raj is that a definite on that?? Im getting conflicting stories here......

[raj]

Raj is that a definite on that?? Im getting conflicting stories here......

look

[Spooky]

Clockwise is firmer on the majority of fast road dampers

[raj]

hang on page9

[Pete@Backyard Racing]

Raj is that a definite on that?? Im getting conflicting stories here......

just 2 confirm, raj is correct

[Brigsy]

i think raj is right, im not 100% sure unless i look at the adjuster knob & its the same as the one in the pic. Turn it one way & you will soon find out, fully soft pushes down easily.

[Pete@Backyard Racing]

just 2 confirm, raj is correct

once again

[Matt Cole]

Thanks chaps, i have them fully clockwise and still notice a difference. Has anyone got a pic of the adjuster minus the knob?? I havent got a knob with mine so need to know how it actually adjusts?

[Pete@Backyard Racing]

Thanks chaps, i have them fully clockwise and still notice a difference. Has anyone got a pic of the adjuster minus the knob?? I havent got a knob with mine so need to know how it actually adjusts?

konis 4 the 5gtt dnt have plastic adjusters ,u just turn the small metal bit at the top with a pair ov plyers or similar

[Matt Cole]

konis 4 the 5gtt dnt have plastic adjusters ,u just turn the small metal bit at the top with a pair ov plyers or similar

Wow thats pikey!! Ive made a little tool which seems to work!

[Jimmy_GTT]

I've bought a pair of rear yello Konis yesterday.
How can I adjust them?
I have tried to turn clockwise and anticlockwise but I can as much as I want.
Or it can be only adjusted when it is totally pushed?

[tobester]

I've bought a pair of rear yello Konis yesterday.
How can I adjust them?
I have tried to turn clockwise and anticlockwise but I can as much as I want.
Or it can be only adjusted when it is totally pushed?

Pull down on the dust cover to expose the piston and bump stop, there will be a zinc coloured cap on the top of the shock body, this lifts off and reveals a plastic spacer, lift the spacer out of the way and there will be a little button, push to adjust rebound. You should feel some distinct clicks when you do this.

[Jimmy_GTT]

Pull down on the dust cover to expose the piston and bump stop, there will be a zinc coloured cap on the top of the shock body, this lifts off and reveals a plastic spacer, lift the spacer out of the way and there will be a little button, push to adjust rebound. You should feel some distinct clicks when you do this.

Thanks, I'll give it a try tomorrow.