-
Non-member
accelerator cable
my accelerator pedal seems too close to the floor but goes up and looks about right if you pull the cable tight from under the bonnet.
is there a way of adjusting the cable so it'll be a bit tighter? i've had a look and cant figure it out oh, and its on a phase 1 if that makes a difference.
cheers guys
-
Non-member
Re: accelerator cable
Undo the clamp on the throttle cable bracket, pull the inner cable further out if possible, 5 min job. P.s don't over tighten the clamp or the cable tends to pull through all the time
-
Non-member
Re: accelerator cable
nice one, i'll have a look at it when i get in tomorow.
don't suppose anyone has a pic of it? just so i know i'm on the right track.
-
Re: accelerator cable
New poster! (less than 10 posts)
You may need to take the little bracket off an bend it as little more if it has gone flat.
-
Non-member
Re: accelerator cable
i've had a look at it earlier and i can't find anything that clamps the cable. it just had a long thin peice, like, crimped to the end of the cable that slots onto a holder for it but there are no clamps, am i looking at the right part?
for now i've put the end in the opposite way so it takes away all the slack and the car feels so much better but i don't really like the look of it how it is i'm scared it'll break.
sorry for the essay.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules