Originally Posted by
Sparkie
strip down...
undo 10 headbolts and remove head
undo the sump bolts - 10mm bolts
undo the timing chain cover - 10mm bolts
undo the timing chain tensioner - 10mm bolts
lock the engine and take off the cam pulley - 16mm bolt
lock engine and remove clutch (6mm allen keys?) and the flywheel -17mm bolts.
remove the cam pulley, chain and crank pulley.
take out the dizzy
take out the cam/dizzy mech gear
undo the 10mm bolts holding the cam in
pull out the cam
undo the allen bolts that hold the oil pump in.
MARK THE CONROD AND CAPS TO EACH OTHER!
undo the caps - 11mm nuts
take off the caps and push the whole liner and piston out as one unit.
undo the main caps- 17mm bolts
remove crank
done.