Results 1 to 4 of 4
  1. #1
    Non-member Grunge's Avatar
    Join Date
    Sep 2008
    Location
    Tiptree, Essex
    Posts
    144
    Post Thanks / Like

    Swirl pot

    I got to work and i thought i could smell oil. So i opened the bonnet and the swirl pot had popped off the pipe under it.. I dunno what happeded, i didnt drive it any different to how i do normal. Im hoping it stays on on the way home.. Does any one know what might of caused this? Also i dunno if this makes any difference but also i noticed on the way to work my temp guage goes down the back up when i go round corners now

  2. #2
    Non-member Brigsy's Avatar
    Join Date
    Sep 2008
    Location
    Redcar
    Posts
    4,138
    Post Thanks / Like

    Re: Swirl pot

    The same happened to me with the oil seperator years ago, jubilee clip the rubber pipe on. The pipe on my gtt had gone baggy with age.

    The pot could also pop off if the engine is breathing a bit heavy too. Clip it on & see if it sorts it.

  3. #3
    Non-member 5teve L's Avatar
    Join Date
    Jan 2003
    Location
    RH12
    Posts
    2,328
    Post Thanks / Like

    Re: Swirl pot

    You mean the oil seperator pot ??
    Just push it back on & it should stay there, the temp gauge, you may have loosened/broken the wires as they are around the back of the oil pot on the water pump

  4. #4
    Non-member Grunge's Avatar
    Join Date
    Sep 2008
    Location
    Tiptree, Essex
    Posts
    144
    Post Thanks / Like

    Re: Swirl pot

    roger il give it a blast <3 thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •