I have some,I got them for modding Dini engines but have learned that its the GT turbo boys that make better use of them
If this is so can I be pointed in the right direction?
I have some,I got them for modding Dini engines but have learned that its the GT turbo boys that make better use of them
If this is so can I be pointed in the right direction?
They're far too small, too much work in modifying them to fit aswell.
isnt the gt17 a td unit?
I think they are smaller than a standard T2 if my memory serves me right
I dont doubt what you say,however the feedback that Ive had is pretty much 50/50.They are interesting little units.
Howabout this then,small enough to fit 2 maybe? Hmmmmm
(strokes beard and has nother puff)
Originally Posted by Adey aka Ewok
yes
They're a 120hp (at a push) rated blower. Waste of time going through the aggro of getting one to fit.
The Garrett website rates them at 175bhp in standard form and it is fitted to the BMW330 diseasel
post up the link, would you
which 330D?
http://www.turbomaster.info/eng/appl...nger_cars/bmw/
Don't they get fecked quite quickly by heat as well? Not what you'd want on a GT engine
All the cars that, that turbo is fitted to........if its the basic gt1749 vnt
http://www.turbo-product.com/Garrett/GT1749V.ASP
that 1100hp alfa looks fun...All the cars that, that turbo is fitted to........if its the basic gt1749 vnt
http://www.turbo-product.com/Garrett/GT1749V.ASP
I'm guessing that some of those cars use 2 turbos
in a 147 as well
I think we'd need to know the sizes of the wheels in that turbo, from what I can see there are 13 possible compressor wheels, and 3 possible turbines. Some are smaller than the standard 5 turbo, and some are a bit bigger.
Std GTT T2 turbo
compressor 48mm exducer, 33.95mm inducer, 50 trim
Turbine 47mm inducer, 35.25mm exducer, 56 trim
You can pretty much tell compressor flow by the inducer diameter, ie 33.95mm
For the GT1749V
compressor 49mm exducer, inducer between 32.9mm and 38mm
turbine 43mm inducer, 35.5 to 36.6 exducer
To put that in context, a T25 with a 60 trim compressor will have a 42mm inducer.
more info needed...
New poster! (less than 10 posts)
You're having a laugh, the 3.0l use the GT22. Give me the part number and i'll know exactly what unit it is.
Get a GT2559 off the Espace/Velsatis.
60mm compressor wheel, T3 sized cover, 54mm turbine wheel.
New poster! (less than 10 posts)
Dave, are they the ones with the twin oil/return feed, V6 job?
Yep, and I think that one on ebay is the one I first owned.
New poster! (less than 10 posts)
Bearing housing shot would have helped jog my memory. They've got a Toyota style core, oil feed from the bottom (which is a twin feed pipe, hard to explain) and a drain right next to it. A massive pain in the arse...
Well if you can get the adaptor from a car that used it, no hardship having two braided hoses connected to it for your drain and feed.
New poster! (less than 10 posts)
Yep, and I think that one on ebay is the one I first owned.
It's not Doug trying to sell it back to you is it?
I first sold one to Biggs a year or two ago...
New poster! (less than 10 posts)
I guess not, you've got to find the adapter to start with. I've chucked quite a few away aswell
Apart from that, you need to precisely drill new positioning holes for the vnt, modify the manifold, modify the water lines, modify the elbow, and find a blanking plate for the ecu plug on the top of the actuator. They also run about 18psi stock.
I just remembered, the actuator would sit practicaly on the manifold with that turbo, impossible to rectify, so not suitable.
True, but you would have hell of a spec standard VNT.
Its basically a T28 spec turbo innit, with VNT. Even the ex housing fully opened is 0.64 AR IIRC..
Could you not lengthen the rod and remote bracket it up so the case of the actuator clears it?
It's hella big, I'd opt for a different bearing housing though, just to have the actuator in a safer position.
Yes, but how far above the manifold do you want the actuator to sit? Heat rises
Wrap it.Yes, but how far above the manifold do you want the actuator to sit? Heat rises
Or if poss use a twin port actuator, flip it 180 and use it as a puller instead of a pusher.
There's a wall on the bearing housing, i'm not sure if the actuator arm would clear it. Does the wrap not absorb the heat too?
New poster! (less than 10 posts)
http://cgi.ebay.fr/BMW-E46-TURBO-GAR...d=p3286.c0.m14
removed by ebay?
New poster! (less than 10 posts)
If you are unable to view it,it maybe this new ebay system that prevents you from looking at foreighn listings.Im in France and so is the listing which is why I can look at it.Its a stupid rule,the seller now has to pay a fee to become visible to overseas bidders.
Cher membre,
Malheureusement, l'accès à cet objet a été bloqué en raison de restrictions légales en vigueur dans certains pays. Conformément à ces restrictions, nous nous efforçons de bloquer l'affichage des objets concernés. Nous regrettons de vous informer que pour des raisons techniques, certaines annonces ne rentrant pas dans le cadre de ces restrictions peuvent ne pas être accessibles aux utilisateurs. Nous vous prions d'accepter nos excuses pour tout désagrément et nous espérons que vous trouverez d'autres objets intéressants sur eBay.
Merci.
Cliquez sur le bouton Page précédente pour revenir en arrière.
Whats that all mean then, all looks foreign to me
roughly translated as "if you can see this, you can't see what you were looking for - unlucky"Whats that all mean then, all looks foreign to me
Posting Permissions
Reply With Quote