Wanted a number of things .

[Danny]

As above guys .
Manual window regulators with handles n/s and o/s
Coolant hose to swirl pot and from , also heater matrix hoses. doesn't matter of condition just to be used for mock up .
Plastic windows
Carbon fibre bonnet or fibre glass ?
Fibre glass boot or the like?
Light weight alloys pref oz
Front Brake calliper carriers x2 o/s/f and n/s/f
Piper 300 cam shaft


Can pick up or pay postage whg

Or alternatively any tips where I may find these items would be super I've tried emailing the get turbo spares chap but I'm yet to recieve a answer.

[markg]

Manual window regulators with handles n/s and o/s - Here's one side but no handle http://www.mister-auto.co.uk/en/fron...919092001.html


Carbon fibre bonnet or fibre glass ? - On here or ebay is most likely the best bet. There was a carbon one on ebay the other day but not there know. However I dont believe they are full carbon and weight savings are not much. I have also read that fit is questionable.

Fibre glass boot or the like? - Try CGB they had them on their website a while back but not there now. Worth a call or email.

Or alternatively any tips where I may find these items would be super I've tried emailing the get turbo spares chap but I'm yet to recieve a answer. - I am sure Mike will get back to you, have you tried calling or sending a PM ?

[Danny]

Thanks for the reply mark most appreciated too!! Out of interest would you no if electric motor glass suits the mechanical regulator ?
Maybe a set of mole grips on the winders would suit lol

I had a look for a contact number on the go turbos spares site but only found an email addy?

Again I will look into the other items company's you mentioned !
Thanks for the advise and help !
Dan

[JRP]

Piper 300 I may have one laying around still, can't remember if I sold it. If I still have it its your for the cost of postage.

Tbh what an earth do you want a piper 300 for.

[Danny]

Piper 300 I may have one laying around still, can't remember if I sold it. If I still have it its your for the cost of postage.

Tbh what an earth do you want a piper 300 for.

I'm looking to change up to the 300, I use a cosworth t3 and the 300 should give me better flow for the bigger turbo . unless someone has a new alternative ?

[JRP]

I'm looking to change up to the 300, I use a cosworth t3 and the 300 should give me better flow for the bigger turbo . unless someone has a new alternative ?

It may work ok for you, if I find it its yours. I'm there next on Friday 24th I'll let you know.

I genuinly can't remember what I got rid of.

[Danny]

That would be awesome jrp ! Nice to see there's still a great spirit on rtoc !! I will happily pay the going rate for one Its no problem keep us informed buddy please.

[JRP]

That would be awesome jrp ! Nice to see there's still a great spirit on rtoc !! I will happily pay the going rate for one Its no problem keep us informed buddy please.

No, if I have it you can just have it I will never use it. I will look when I'm up at my dads next. I did get cleared out of bits so unsure what I kept as medication kind of blurs my memory's.

I will look, and hope I find it for you.

J

[Matt_S]

I'm looking to change up to the 300, I use a cosworth t3 and the 300 should give me better flow for the bigger turbo . unless someone has a new alternative ?

No disrespect, but why would you use a T3 when there are more efficient, more modern turbos which are more suitable and available now?

[Danny]

No disrespect, but why would you use a T3 when there are more efficient, more modern turbos which are more suitable and available now?

Its what ive had on it for the last ten years ive just pulled it out of storage, i was thinking around a big vnt route but didnt want to get into something that i was unsure of , again no disrespect taken any help is most welcomed.

turbo break down .
Its cosworth 2wd front and rear wheel with an escort rs back exhaust housing with the saab 93 exhaust flange, Its a nice set up tbh and has great power but again im very open to suggestion.