Corrado VR6 Detail

[scratcher]

Another cool car for you guys

I had the pleasure of detailing this Corrado today. I've always been a big fan of these cars.
It had some patches on the roof and bonnet that stood out as being dull.

The car on arrival. It was in pretty good shape, nothing too serious going on.









The usual build up in the tight spots.




Onto cleaning.
The car was pre-soaked using Avalanche. While that was dwelling I attended to all the tight gaps with Envy brushes and Verso.
Then onto the Wheels using Imperial and Wolf's Decon Gel.



The car was washed using the 2 bucket method with Chemical Guy's Citrus Wash & Gloss and a CarPro mitt.

Tar spots were treated with Tardis.



Gone!



The car was then clayed using a Art De Shine clay cloth, re washed and then dried using compressed air and an AF towel.

Inside the damage was assessed and paint depth measurements taken.











The car had been resprayed in the past and there were a few different paint types so each panel was polished starting from scratch.
The marks on the roof and bonnet would not polish out so a gentle wet sand took the edge off so that I could reveal a decent, even finish across the panels.

Polishing was done using...
Rotary, large throw DA, Meg's 105, Scholl S17+, Sonax 4/6, Meg's 205, Menzerna Power Finish. Meg's Microfiber pads, Hexlogic Orange, green and white, SP Orange and green. So lots of different combos on this

The results were coming through.
Those bird bomb marks on the roof...



A poor 50/50 on the passenger side door.



Corrado VR6 Detailing - YouTube

The paint was coming out nice and clear.

Before



After



Some of the wet sanding on the bonnet. It took a few sets on each part to fully remove all of the marks, but here's the result from one set.

Sanded,



Polishing



Done. 2 more sets were completed to fully remove the marks.



The car was refined all over using Sonax 4/6 and Meg's 205 before 2 layers of AF Tough Coat.



I then applied 2 layers of Wolfgang Fuzion.



The windows were polished with G|techniq C4
Exhaust polished with #0000 wire wool and Meg's NXT
Tyres dressed with Meg's Endurance
Trims with AF Revive
Door shuts were wiped down with Meg's D114

The finished shots.
















Thanks for reading. Any comments or questions, fire away

[Dre5gtt]

Top job mate 👍

[Matt Cole]

Going to need my five detailing like that!

[Trevhib]

Fan-bloody-tastic. This looks awesome, I bet the owner is really chuffed.

So many products go on these detailing jobs.

[steveT2]

Why can't your location be closerwould love to let you loose on my s2000
that corrado looks awesome

[scratcher]

Top job mate 👍

Thanks Dre

Going to need my five detailing like that!

Cheers Matt. Get in touch, we can book you in

Fan-bloody-tastic. This looks awesome, I bet the owner is really chuffed.

So many products go on these detailing jobs.

Thanks buddy you're right, a lot of different products are needed, especially a car like this with different paint all over the place.
The owner was very happy, he's already booked in for a maintenance programme to maintain this level

Why can't your location be closerwould love to let you loose on my s2000
that corrado looks awesome

There's lots of things to do in Milton Keynes for a day out Haha.