hello folks
basically i contacted the good man boris about a downpipe.
long story short he told me if there was enough interest he would possible maybe contemplate think about making another batch
so just out of interest would anyone be interested ?
if so whack your name down and maybe we can persuade the good man to grace our cars with his finest pieces.
dogz
I'd like 1 please.
Russ.
Dogz
Russ
Penfold
Dogz
Russ
Penfold
Sy
Ohhh Yes Please!
Dogz
Russ
Penfold
Sy
Spooky
Is everyone aware of how much it will cost given the quality and workmanship involved?
Hate to see everyone sign on then back out once they hear how much.
Either way I have also spoken to Boris myself, count me in:
Dogz
Russ
Penfold
Sy
Spooky
Tiff_lee
i know a rough price involved but as we all kno its worth it
New poster! (less than 10 posts)
Dogz
Russ
Penfold
Sy
Spooky
Tiff_lee
Adeel GT (depending on price)
me too...jeebusOriginally Posted by adeel_gt
Dogz
Russ
Penfold
Sy
Spooky
Tiff_lee
Adeel GT (depending on price)
me too...jeebus
Frix
So how much are they going to cost?
I'd hate to put my name down only to have to pull out...
I would like to know also
So how much are they going to cost?
I'd hate to put my name down only to have to pull out...
im sure when i bought one they where around the £130 mark give or take a few££
i would say all depends on how many we get made, the more the cheaper!
If they're circa £130 I'll be interested
what kind of advatages does the downpipe give, sorry for being silly but just interested.
reduces back pressure, allowing turbo to spin up quicker!!
ah , i also notice they have a lamda sensor hole, is this so you can run a bit of kit to read afr's
ok im sold, im a sucker for cool enginered products, bonus if it has its uses, and saves me welding the in the thread for a sensor.
Dogz
Russ
Penfold
Sy
Spooky
Tiff_lee
Adeel GT (depending on price)
me too...jeebus
Frix
Djinuk
bit of quick info for the unaware(like me)
handmade turbo elbow/down pipe by boris (bms)
from what i gather it has a bigger bore which will allow as frix said gases to escape quicker resultin in less back pressure resulting in happy times
lambda sensor hole already built in for the use of lm-1/lc-1 or any other wideband or air fuel meter you got.
i thought theyd be a bit more than 130 but i cant say for sure...if so i dont mind but al guess we have to wait until the time comes
[IMG]file:///C:/DOCUME%7E1/ADMINI%7E1/LOCALS%7E1/Temp/moz-screenshot.jpg[/IMG]
Last edited by dgdogz; 14-01-2009 at 16:32.
Dogz
Russ
Penfold
Sy
Spooky
Tiff_lee
Adeel GT (depending on price)
me too...jeebus
Frix
Djinuk
gttjames (also price dependent)
C5 SWH (price dependant)
Isn't it a little pointless creating a list when a price hasn't been supplied? Maybe get one price for 10+ units and 20+ units etc?
Dogz
Russ
Penfold
Sy
Spooky
Tiff_lee
Adeel GT (depending on price)
me too...jeebus
Frix
Djinuk
gttjames (also price dependent)
Dave..H(depending on price)
I wouldn't mind one, but i've got a .64 back end, which uses a different stud pattern. I'll have to check to see if it's the same as the .49, I can't remember. All I remember is I had to use the mill to modify the casing so the stock elbow would fit on.
i sent my housing off to him mate as it was a different stud pattern he made me one up to suit
New poster! (less than 10 posts)
It's nice to see people are still intrested in the one-peice downpipe I created a year or so ago, at the time it was enjoyable making them.
On the last batch I made the prices of the laser cut flanges had increased, and the d/p price reflected that, the cheapest I could make them now would be around 160/170.
That's taking into account the laser cut flanges, mandrell bent pipe, lambda b+b, p+p, time taken to make ect.. Unfortunatly I can't sell them for any cheaper.
Anyways, it seems https://www.rtoc.org/boards/member.php?u=765 is ready to make a few using the jig from the 'msm' day's, sound's intresting as the one I saw looked nice. Im not in a rush to make any more so see what Jim is saying. (including pics/price?) If there any good im sure it will sort out the few people wanting a downpipe upgrade.
And is Scott K making some more 3" downipes?
New poster! (less than 10 posts)
Bms downpipes don't get cheaper the more you buy as it still takes the same amount of time to make each one.i would say all depends on how many we get made, the more the cheaper!
Mind you, If Big Jim can knock em' out for a possible tonne+ with nice quality then it must be a win-win for the buyer.
Thanks for the kind words Boris (about the pipe that is!!). I've mentioned on another thread that if I get a minimum of 10 confirmed orders then I will make a batch for 150 squids each. They are a bit of work, but lucky for you lot I've just found a VERY reasonable supplier for laser cut flanges. PM me if you're interested.
PS I could also make them any size you want (for a supplement, of course!). The problem is the bottom joint which (unless you're having a custom sytem as well) will always be limited to 2 1/2".
or is that system?!
sounds good las
hope all goes well and someone will take on the rola of makin us happy and making some money
remeber profit must be had chaps
I would be up for one if I could have the lambda bung and a boss for an egt sensor, or should I be putting the sensor more up stream?
im sure 6 inches was about right from the turbo elbow
Bosses can be placed anywhere you want them, just let me know what they're for(so I know what thread to make them...)
1 question,im sure i read that they come with a hole for an AFR sensor or something and i dont have an AFR gauge...im not too hot on technical stuff so are the pipes supplied with these holes or is it just a case of a pm saying (no holes please) to the maker or would i have to get some kind of bung to plug the hole up?
Last edited by Russgt5; 19-01-2009 at 17:45.
I have asked the same question as I'm going to be getting a LM-1 at some point. They should come with boss and bung imo.
Ill have one as they look the nuts,
But ill need one with the different stud patten, cannot rember off the top of my head what it is, but remember seeing him do a few different ones, if this happens will sort that out then,??????
Nice one chaps...
Last edited by rennie5gtt; 19-01-2009 at 17:46.
EGT should be measured BEFORE the turbo.
ok so whos making these downpipes?
read the first post mate, maybe getting made????
there are two possible suspects making these if you read further into the thread
Try reading the whole thread!
guys what going on with these downpipes!?
have we made another pointless list of names!!??
Ok, Big Jim Racing is willing to make some of these but needs 10 + names. Price will be around the £150 mark so all who are interested please send him a PM as I want one.Come on, you know you want to
doggy dogz
I have spoken to big jim about these has anyone else, think he is going to ask people for a deposit, just to make sure you lot that put your name down still want them....?????????
Let get this going shell we...?????????
I have PM'd him a few times. I'm up for this. Come on peeps...
Thats two 8 more than???????????
I have also PM'd Jim
Posting Permissions
Reply With Quote