Results 1 to 12 of 12
  1. #1
    Super Administrator R5MJH's Avatar
    Join Date
    Feb 2011
    Location
    Down South
    Posts
    3,865
    Post Thanks / Like

    alloy wheel fitment

    right, i know the fitment and may have found some new alloys as mike buckled one, im waiting on a email about the centre hole but ive just noticed there 6.5j thou will the 195/45/15 toyos fit ok thanx mick

  2. #2
    East Midlands Area Rep Mr Raider's Avatar
    Join Date
    Sep 2008
    Location
    Norwich
    Posts
    2,062
    Post Thanks / Like

    Re: alloy wheel fitment

    Centre bore for renault is 60.1mm, although can use spigot rings to ensure correct fitment. Need to be 4 x 100 PCD which is for the holes for the bolts. Any ideas on offset? can run spacers if needed

  3. #3
    Super Administrator R5MJH's Avatar
    Join Date
    Feb 2011
    Location
    Down South
    Posts
    3,865
    Post Thanks / Like

    Re: alloy wheel fitment

    Quote Originally Posted by Mr Raider View Post
    Centre bore for renault is 60.1mm, although can use spigot rings to ensure correct fitment. Need to be 4 x 100 PCD which is for the holes for the bolts. Any ideas on offset? can run spacers if needed
    yeah i done some homework et35 is the offset but they are 6.5j instead of 7j so slighty narrower i was wondering if the 195's will sit ok and not bulge on the rims

  4. #4
    East Midlands Area Rep Mr Raider's Avatar
    Join Date
    Sep 2008
    Location
    Norwich
    Posts
    2,062
    Post Thanks / Like

    Re: alloy wheel fitment

    Ah ok, so .5j is the difference in width of the rim itself, 5mm?

    The width is the section between the tyre mounting flanges on the wheel

    http://www.rimstyle.com/pages/alloy_...explained.html

  5. #5
    Super Administrator R5MJH's Avatar
    Join Date
    Feb 2011
    Location
    Down South
    Posts
    3,865
    Post Thanks / Like

    Re: alloy wheel fitment

    thanx sir what i mean is on the current 7j rims the tyre sit flush with the rim with 195's because these are slighty smaller i was wondering if the 195's would bulge slighty

    does anyone have a 195/45 on a 6.5j rim to tell me ot have a pic??

    thanx mick

  6. #6
    Non-member Biggs's Avatar
    Join Date
    Sep 2008
    Location
    My house
    Posts
    251
    Post Thanks / Like

    Re: alloy wheel fitment

    195's will be fine on 6.5j

  7. #7
    Super Administrator R5MJH's Avatar
    Join Date
    Feb 2011
    Location
    Down South
    Posts
    3,865
    Post Thanks / Like

    Re: alloy wheel fitment

    ok what about 16"s on 195/45/16 with car lowered 35mm, has anyone done this??

    do they rub??

    thanx mick

  8. #8
    Non-member Biggs's Avatar
    Join Date
    Sep 2008
    Location
    My house
    Posts
    251
    Post Thanks / Like

    Re: alloy wheel fitment

    Quote Originally Posted by R5MJH View Post
    ok what about 16"s on 195/45/16 with car lowered 35mm, has anyone done this??

    do they rub??

    thanx mick
    I'm pretty sure that's what I used to run on the car I sold markey b, could possibly have been 40/16's (was a long time ago now)I never had any rubbing issues and that was on coilovers.

  9. #9
    Ireland Area Rep turbo ted's Avatar
    Join Date
    Sep 2008
    Location
    Ireland Co. Kilkenny
    Posts
    645
    Post Thanks / Like

    Re: alloy wheel fitment

    mick it will be fine audreys car runs 195/45r16 now and it used to run 205/40r17 but the tyres where to hard for the 5 suspension setup.
    Attached Images Attached Images  

  10. #10
    Super Administrator R5MJH's Avatar
    Join Date
    Feb 2011
    Location
    Down South
    Posts
    3,865
    Post Thanks / Like

    Re: alloy wheel fitment

    Quote Originally Posted by turbo ted View Post
    mick it will be fine audreys car runs 195/45r16 now and it used to run 205/40r17 but the tyres where to hard for the 5 suspension setup.

    thanx sir will 172 turinis fit the 5 with 5mm spacers

  11. #11
    Committee member
    Rats Nest Tuning
    Ashy's Avatar
    Join Date
    Aug 2008
    Location
    Durham
    Posts
    3,198
    Post Thanks / Like

    Re: alloy wheel fitment

    Quote Originally Posted by R5MJH View Post
    thanx sir will 172 turinis fit the 5 with 5mm spacers
    I run turinis on mine with 205/40/R16's and 5mm spacers on the front. They catch slightly on full lock and the rears rub a little when fully laden....

  12. #12
    Super Administrator R5MJH's Avatar
    Join Date
    Feb 2011
    Location
    Down South
    Posts
    3,865
    Post Thanks / Like

    Re: alloy wheel fitment

    Quote Originally Posted by Ashy View Post
    I run turinis on mine with 205/40/R16's and 5mm spacers on the front. They catch slightly on full lock and the rears rub a little when fully laden....
    thanx ash , were yours the et38.5 or et45 as the 45s would still rub i expect

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •