Clio 197 pcd/offset/bore?

[Haz]

Anyone know the pcd, offset and bore of clio 197/200 wheels please. Just spotted these on eBay,

http://www.ebay.co.uk/itm/H-R-5X108-...item2a36b1fe93

Not that they are any use to me, but they are the same pcd as Renault 21's so I'm assuming the wheels will go on and may offer a few other options as there isn't many?
Thanks

[Ricardo]

5 X 108 PCD, all Renault centre bores are 60.1mm

ET68 is coming up in a couple of places

[Haz]

Ok, good to know. Seems there are a few choices, val satis, v6, espace, Laguna, well all 5 stud version are listed as 5x108 with 60.1 bore so I think the only factor is the et which can vary on different websites ranging from 35-45.
Anyone with 5 stud wheels fancy checking the et on them?

[clee]

I'm in the process of fitting these to a GTA ....a610 turbines ,R21 hubs into GTA carriers .Some machining to do on the std GTA disc to fit and will also be looking at other disc options but will mean making up some extender brackets .
Unique offsets on the GTA/610 and rocking horse wheels for both ...and Spider ....I'd be interested in any data on offsets/widths for any 5x108 pattern


For now I'm happy with it all just being std but have a big brake setup that I'll need to convert to 5 stud .Hopefully that will just mean putting 5x108 holes in the bells and the calipers will clear on the existing brackets .

[Haz]

So are what are the gta std stud/pcd/bore/et?
So a610 wheels fit the 21 hubs, but width and offset wrong? What are they for those wheels? are they not different widths frt/back?
They look funky 👍

Oh, and what size?

[Trevhib]

They are like Clio turbines but for the big boys

Are they 16" on the front and 17" on the rear?

[clee]

Fronts 7j 16" 35et,rears 9j 16" 15et