I am in need of some pictures of one peice down pipes.
what you peeps
I am in need of some pictures of one peice down pipes.
what you peeps
pm mate
Boris BMS
Few more. Yeah, I love this DP
i want oneOriginally Posted by jure
Few more. Yeah, I love this DP
Is Boris still making them or has he gone into hibernation ?
Think not. I got mine from the last batch about half a year ago. It is masterpiece
i think he has stopped making them try dropping him a pm see what he says. i found him very helpfull and his work is top quality
That is awesome I want one! How much did he charge for them?
Do they fit just the T2? I'm loving that stainless manifold to very nice.
they were made to fit the t2 exhaust housing, however i sent him my housing as it had a differnet stud pattern so he made me one up to suit.
Straight fit to 4 bolt T2 and T25. So, standard GTT turbo and most of the T25 upgrades including Tomcat and 200SX turbo.
Price was somewhere around 150-160 quids if I remember correctly.
Nice!
Where did you get that stainless manifold from if you dont mind me asking?
No, not at all. I had some agreement with guy that works for Protoxide (www.protoxide.it) and got manifold for little better price
i also have one of these bms downpipes
Blimey just checked out the price bit too much for me! shame as its damn nice looking.No, not at all. I had some agreement with guy that works for Protoxide (www.protoxide.it) and got manifold for little better price
Thanks for the link though.
ooeer just had a browse on protoxide. i havent seen these transparent dizzy caps for years!! absolutely rediculess price though
Yeah. Protoxide is way too expensive. Wouldn't buy anything directly from them including my exhaust manifold...
will that clear dizzy cap fit the 5???
sorry but just checking...as it only says twingo
It says R5 and Twingo mate. Yes, it will fit 5
thanks jure
appreciated
New poster! (less than 10 posts)
My 3" downpipe and elbo
whered you get that scott and how much? cheers
whoa! thats looking beefy mate!! did you know that up yourself or made for you.? i like how it looks really smooth if you get me!?
LOL sounds like i should have been more worried about you than your dog
I used to make the 2 1/2" downpipes Mike Spencer sold, I've still got the jigs, so if enough people want one I could knock a few up. No pics though.
I'll defo be interested Jim.
Might well be interested Jim if there a bit cheaper than others mentioned, cant justify over £100 on a pipe these days.
I used to make the 2 1/2" downpipes Mike Spencer sold, I've still got the jigs, so if enough people want one I could knock a few up. No pics though.
I'd be interested, will they be one piece and have a bung in them?
It can be done for under £100
http://cgi.ebay.co.uk/Nissan-S13-200...1%7C240%3A1318
What? Modify this or new one for GTT? I say that anything near BMS quality would be waaay more.
You cannot compare 200SX and GTT. There is a lot more this Nissans around and most of the owners buy it to modify it. Look at the price of shocks, springs, shortshifters, brakes, calipers...
Ok so the GTT would be slightly longer. I guess it depends on what its made of, how long it takes to make and where it's made that will see the price go up.
It was just a loose comparison.
I got you now. But I think that price is mostly determined on pieces made and on offer/demand bias. It is normal that 20 DP made only by Boris' hand cost more than 2000 made by machine or 30 workers in Japan, China or States. At my place I can have tuned Golf MKI, MKII and MKIII at same time, for same sum of money but I choose GTT
I used to make the 2 1/2" downpipes Mike Spencer sold, I've still got the jigs, so if enough people want one I could knock a few up. No pics though.
yeah mate, would be interested! im in need of one of these
New poster! (less than 10 posts)
I bought the pipe work and turbo flange,measured and cut all the pipe work,local stainless company welded it up for me and made bottom flange and collar,both in stainless.
How much did that cost in total Scott? Looks really nice
New poster! (less than 10 posts)
As a 1 off far to much.£220 ish i think.Had it made over 2 years ago.
if someones making a boris type jobbie/1 piece elbow downpipe. put me down for one
there is another thread called downpipe and it explains if there is enough interest boris may come out of retirement
It's all down to scale. If there's enough demand that you can get someone interested in bending the pipework in one piece and cnc-ing the flanges then £100 is do-able. If you're only making 10 or so then it's going to be more like £150, or it's just not worth doing.
id like one of those to
Anyone who is interested in one PM me, when we get to 10 CONFIRMED ORDERS I'll get on the case.
isnt boris making these for people then.?
From the looks of what Boris said in the group sales downpipe thread he isn't in a rush to make anymore.
Jim, would love to put my name down, its great your doing this but with how things are a price is needed, dont wanna put my name down and mess you about later as price is higher than expected and i cant afford it.
Check the group buy downpipe thread Dave, price and details in there.
anybody have some pics of the downpipes jim is offering ?
Hi,
hope this is the right thread.
I'm thinking of buying a one piece down pipe.
I have seen in the club shop that Big Jim downpipe is available.
Does it worth channging the original for such a pipe?
What is the diameter of this downpipe?
Thank you all your help!
I think the diameter is 2 1/2 inches OD. Wider at the upper flange.
Thanks mate!
Than the rest of standard exhaust won't fit, will it? The pipes are std. till the back box.
So that should be the beginning of a new exhaust system.
What are you guys recommend?
Posting Permissions
Reply With Quote